Prahran, VIC store now open from Friday to Tuesday, 10am till 6pm.

Nakagawa Hamono  |  SKU: NAKA_G3KA_SU240EB

中川 銀三鋼 筋引 240mm 霞仕上げ

定価 $549.95

Availability

  • St Peters, NSW
    2 Bishop St, Unit 2, St Peters NSW 2044
  • Crows Nest, NSW
    107 West St, Shop 1, Crows Nest NSW 2065
    Pickup only
  • Prahran, VIC
    180 Commercial Road, Shop 1, Prahran VIC 3181
    Pickup only
詳細仕様
ライン 初心 中川 銀三鋼 広鎬 磨き
刃の形状 筋引 / 筋引
刃の種類 Double Bevel
重量 165 g | 5.8 oz
刃渡り 230 mm | 9 1/16″
あごの高さ 36 mm | 1 27/64″
あご部分の刃幅 3.0 mm | 1/8″
中央の刃幅 2.4 mm | 3/32″
切っ先から1cmの刃幅 1.0 mm | 3/64″
鋼材 銀三鋼 | ステンレス鋼
刃の構造 三枚合わせ・ステンレスクラッド
Hardness (HRC) 60 - 62
表面仕上げ 磨き
八角黒檀柄
産地
最適な用途
  • プロの料理人
  • 学生・初心者
  • 初めての方
  • オーストラリア国内でAU$200以上の包丁は送料無料
  • DHLエクスプレスによる世界配送、3〜5日でお届け


The Nakagawa Ginsan Wide Bevel is a line commissioned by Hatsukokoro that offers a series of very solid blades that are good for both professional works and home use. This line combines moderate thickness, decent profile and good detail finish in a completely stainless package, making these knives good all-rounders in most situations, wether at home or in a more professional setting.

The wide bevel in the name refers to the grind that these blades takes on. Usually Japanese double bevel knives will have a flat grind, where the secondary bevel starts all the way at the spine, in cases where the secondary bevels start halfway, they tend to blends into the flat zone slightly. This line however, have a very distinct boundary at the begining of its secondary bevel,creating a very sharp and geometrycall look, especially on the Kiritsuke Gyuto, which distinct the entire line from other plain Migaki finish knives.

Performance of the kinfe on the chopping board is great, as the bevel takes a concave grind, it is of a good sharpness even the thickness of the spine is not as thin as some "laser" knives, though there is a slight tendency for the food to stick due to this grind. This combination allows the edge to be thin, while having more material behind the bevel to provide toughtness in a professional setting.

The Ginsan steel used in this line is what makes these knives truly all-rounders in my opinion. Comparing with VG10, two steels have similar hardness and edge retention, but the higher alloy content in VG10(Mo,V and Co) makes the sharpening harder than a more "pure" composition like Ginsan's. Thus, in a commercial kitchen where the wearing and sharpening of knives happens more often, the Ginsan will often save time and efforts.

A drawback comes with Ginsan is that knives made with it tend to have a higher price, which is true on this line. Also, even the rounding and polishing on the spine and choil are all pretty good, the Migaki finish is not the aesthetically pleasing one in this price range. If these minor concerns don't bother you, this Ginsan wide bevel line will offer s me very good user's knives.

長所 短所
  • 手入れが簡単
  • 家庭用に最適
  • プロ仕様
  • 高価格帯
お手入れ方法
  1. 硬いものは切らないでください!日本の包丁は硬くてもろいため、骨を切るのは厳禁です。
  2. 使用後は中性洗剤で洗い、水気を拭き取ってください。
  3. 食器洗い機での洗浄はおやめください。木の柄を傷める原因となります。
  4. 包丁を熱源のそばに長時間放置しないよう、ご注意ください。
  5. 刃の鈍った包丁で切るほうが、よく切れる包丁で切るよりもはるかに危険です!
  6. 日本の包丁は、砥石で定期的に研ぐことをお勧めします。
  7. Error: Steel nature unknown

中川打刃物

中川打刃物 - 堺の新鋭工房(2021年創業)

中川悟志氏により2021年4月に設立された中川打刃物は、伝説の職人・白木健一氏の弟子である中川氏の指導のもと、名門白木刃物の伝統を受け継いでいます。主に白木氏のもとで約20年の経験を積み、特に白木氏の晩年の5年間において最高峰の本焼刃の製作に大きく貢献しました。

その技術は白木刃物の製品にとどまらず、青木刃物製作所や堺菊守など、堺の有名ブランド向けの一流包丁鍛造にも発揮されています。大阪府堺市を拠点とする中川打刃物は、幅広い切っ先を持つ銀三鋼および青紙鋼の包丁を専門としています。

“堺の新世代を牽引する鍛冶”

Est. 2021 | 令和3年
Known for 片刃、高い生産能力、各種日立鋼への優れた熱処理
Website nakagawa-knives.com Instagram @nakagawa_kajiya Read more about 中川打刃物
中川打刃物 — 堺
Profile: 筋引
Profile

筋引

筋引

筋引(スジビキとも呼ばれる)は西洋のキッチンで見られるものよりも薄く鋭い刃が特徴的な、日本独自のスライサーです。長い刃体はタンパク質を美しく薄くスライスしたり、テリーヌやパテを繊細に切り分けるのに最適です。刃渡りは210mmから300mmまであり、中でも240mmと270mmはバランスの取れた長さと操作性で特に人気があります。本来の用途で使用した場合、筋引には大きな利点があります。牛刀と比較して刃体が薄いため柔らかいタンパク質との接触面積が少なく、食材が刃に張り付く摩擦を軽減できます。さらに、概ねフラットな輪郭はスライス作業に完璧であり、炭素鋼の芯材と組み合わせれば大型肉塊のポーションカットに最適なツールとなり、時にはメロンカッターとしても活躍します。
Composition

銀三鋼 Element Composition

Compare with
    銀三鋼
    13.75% 10.3% 6.9% 3.4% 0
    C Carbon 1.02%
    Primary hardening element. Raises hardness and wear resistance — but too much increases brittleness and corrosion susceptibility. As a reference: German 1.4112 (~0.5%) sits at the low end; VG-10 (~1.0%) is a common mid-range; SG2 (1.25–1.45%) and ZDP-189 (~3.0%) represent high and extreme ends respectively.
    C
    1.02%
    Cr Chromium 13.75%
    Raises corrosion resistance; 13%+ qualifies steel as stainless. Also improves hardenability and wear resistance. In kitchen use, higher chromium levels contribute to a slight drag or sticking sensation when cutting — a trade-off for the rust resistance it provides.
    Cr
    13.75%
    Mn Manganese 0.8%
    Aids hardenability and strength. Acts as a deoxidiser during smelting. Excess can reduce toughness.
    Mn
    0.8%
    Si Silicon 0.35%
    Strengthens the steel matrix and acts as a deoxidiser. Improves hardness and resistance to oxidation.
    Si
    0.35%
    P Phosphorus 0.03%
    Impurity from the smelting process. Even small amounts cause brittleness — steelmakers keep this as low as possible.
    P
    0.03%
    S Sulfur 0.02%
    Impurity that reduces toughness and promotes brittleness. Intentionally added only in free-machining steels.
    S
    0.02%
    C — Carbon Cr — Chromium Mn — Manganese Si — Silicon P — Phosphorus S — Sulfur
    Hardness 60–62 HRC
    555759616365+
    Steel
    銀三鋼
    Category
    ステンレス鋼
    Manufacturer
    日立金属株式会社、日本
    Hardness
    60–62 HRC
    Steel

    銀三鋼

    • Manufacturer
      • 日立金属株式会社、日本
    • Nature ステンレス鋼
    • Hardness60–62 HRC
    銀三鋼(別名Silver #3またはG3鋼)は、高品質な包丁に使用されるステンレス鋼の一種です。炭素鋼特有の伝統的な切れ味と手触りを維持しつつ、ステンレス鋼の錆への強さを兼ね備えている点が高く評価されています。適度な量の炭素やクロムなどの合金元素を含み、刃持ちと研ぎやすさのバランスに優れています。特に微細な組織構造により非常に鋭い刃付けが可能で、錆に強いため、炭素鋼のパフォーマンスを求めつつ手入れの手間を抑えたいプロの料理人や家庭の調理人に人気があります。銀三鋼の包丁は耐久性が高く、手入れが容易で切れ味にも優れており、高品質なステンレス製刃物をお探しの方に最適な選択肢となっています。
    Construction: 三枚合わせ・ステンレスクラッド
    Construction

    三枚合わせ・ステンレスクラッド

    三枚合わせ(Sanmai)は両刃包丁に多く見られる構造で、硬い芯鋼の両側に柔らかい地金を鍛接したものです。硬くてもろい芯鋼が熱処理後に鋭い刃先を形成し、柔らかい地金がそれを支えることで、ブレード全体の強度を高めます。

    柔らかい地金は、本焼やモノスチール構造に比べて薄くする工程を容易にします。また、地金にステンレス鋼を使用した場合、炭素鋼やセミステンレス鋼の芯材を錆や変色から守ることができます。

    Finish: 磨き
    Finish

    磨き

    「磨き」とは日本語で「研磨された」「光沢のある」状態を指します。日本の包丁における「磨き仕上げ」は、単なる鏡面仕上げだけを意味するのではなく、半光沢から上品で控えめな光沢まで、幅広い研磨仕上げを含みます。高度な反射面を目指すのではなく、耐食性の向上や切削時の抵抗軽減など、包丁の機能性と美観を高める滑らかな仕上げに主眼が置かれています。

    Handle
    Handle

    八角黒檀柄

    • Profile 八角和柄
    • Material
      • 黒檀

    This handle, crafted from a single piece of ebony, exemplifies minimalist elegance and functional design. Its unique octagonal shape, featuring a subtle taper, offers a comfortable grip and a visually appealing geometric profile. The ebony wood, known for its deep, rich color and durability, has been meticulously milled from a single block, ensuring a seamless construction that highlights the wood's natural beauty and grain. The handle's surface has been highly polished, achieving a glossy finish that not only enhances the ebony's luxurious dark hue but also provides a smooth, tactile experience for the user. This design choice reflects a minimalist approach, focusing on simplicity, quality, and usability. The combination of the octagonal shape with the taper adds a modern twist to the classic material, making it a standout piece that blends traditional craftsmanship with contemporary aesthetics.

    1 / 5

    よくあるご質問

    初心 by 中川 銀三 ワイドベベルシリーズとは?どんな人におすすめ?

    中川製作の初心銀三鋼ワイドベベルは、特定のワイドベベル研ぎを施したステンレス鋼包丁の別注ラインであり、プロの料理人から家庭での調理まで幅広く使える万能包丁として設計されています。

    このコレクションは、炭素鋼の手入れの手間をかけずに耐久性が高くメンテナンスの楽な道具を求める方に適しており、初心者、学生、現役のプロまで幅広くお使いいただけます。日常使いには十分な性能を発揮しますが、その分コストがかかるのが難点で、現在在庫のあるエボニー柄210mm牛刀や170mm三徳などは、いずれも価格が高めとなっております。

    We trust this information is correct at the time of writing, but it is not an official document and details may change without notice. If you spot an error, tell us and we'll fix it.

    You May Also Like