Prahran, VIC store now open from Friday to Tuesday, 10am till 6pm.

Tsunehisa  |  SKU: TNHS_A8TS_SU24_BRN

柴田 崇行 AUS8 槌目 筋引 240mm

定価 $199.95

Availability

  • St Peters, NSW
    2 Bishop St, Unit 2, St Peters NSW 2044
  • Crows Nest, NSW
    107 West St, Shop 1, Crows Nest NSW 2065
    Pickup only
  • Prahran, VIC
    180 Commercial Road, Shop 1, Prahran VIC 3181
    Pickup only
詳細仕様
ライン 柴田崇行 AUS8 槌目 洋柄
刃の形状 筋引 / 筋引
刃の種類 Double Bevel
重量 147 g | 5.2 oz
刃渡り 246 mm | 9 11/16″
あごの高さ 34 mm | 1 11/32″
あご部分の刃幅 1.7 mm | 1/16″
中央の刃幅 1.6 mm | 1/16″
切っ先から1cmの刃幅 1.0 mm | 3/64″
鋼材 AUS-8 | ステンレス鋼
刃の構造 三枚合わせ・ステンレスクラッド
Hardness (HRC) 57 - 59
表面仕上げ 槌目
洋柄パッカウッド(ボルスター付き)
産地 福山
最適な用途
  • 初めての方
  • 学生
  • オーストラリア国内でAU$200以上の包丁は送料無料
  • DHLエクスプレスによる世界配送、3〜5日でお届け


この柴田崇行のブレードは、槌目仕上げにサンドブラストによる霞仕上げを組み合わせています。鎬筋には波状のマスクが施されており、ブレード表面と切刃の境界線に視覚的に興味深い模様を生み出しています。フルタング構造には金属製のボルスターが付いており、金属部材間にわずかな隙間はあるものの、ボルスター、ハンドルスケール、ブレードはいずれも美しく研磨されており、見た目にも握り心地にも優れています。

AUS-8鋼は一般的に安価な鋼材と見なされることが多く、多くの場合それは間違いではありませんが、性能が劣ることを必ずしも意味しません。耐摩耗性はV金10号に及びませんが、その代わりにAUS-8は明らかに優れた靭性を備えています。初心者向けの包丁を選ぶ際、これは考慮すべき重要な点です。西洋包丁での使用習慣の多くは、日本の包丁では欠けや破損の原因となることがあります。より靭性が高く欠けにくい鋼材を使用することで刃先を保護し、使用後すぐに包丁が損傷してしまう事態を避けることができます。この鋼材がどれほどの衝撃に耐えられるかを示す数値はありませんが、初心者の方や友人への贈り物としてこの包丁を勧める際には、安心感を感じていただけるでしょう。

これらのブレードの研ぎも良好です。凝ったジオメトリではありませんが、比較的薄い刃厚により包丁は比較的スムーズに切れ込みます。刃元の裏にはある程度の厚みがありますが、切れ味に影響するほどではありません。唯一の難点は、比較的平坦な切刃であるため、密度の高い食材を切る際に若干貼り付きが生じる可能性があることです。

バランスの良さと性能が魅力的な価格に見合っているため、初心者向けの包丁をお勧めする際には、このシリーズは間違いなく候補に入ります。さらに、耐久性に優れた洋式フルタング構造は、一般的な西洋包丁に近い形状とバランスを持っているため、日本の素晴らしい包丁の世界に足を踏み入れたいと考えている方にとって、移行をよりスムーズにしてくれます。

長所 短所
  • お手頃価格
  • 家庭用に最適
  • 手入れが簡単
  • 高級鋼材ではない
お手入れ方法
  1. 硬いものは切らないでください!日本の包丁は硬くてもろいため、骨を切るのは厳禁です。
  2. 使用後は中性洗剤で洗い、水気を拭き取ってください。
  3. 食器洗い機での洗浄はおやめください。木の柄を傷める原因となります。
  4. 包丁を熱源のそばに長時間放置しないよう、ご注意ください。
  5. 刃の鈍った包丁で切るほうが、よく切れる包丁で切るよりもはるかに危険です!
  6. 日本の包丁は、砥石で定期的に研ぐことをお勧めします。
  7. Error: Steel nature unknown

柴田 崇行

柴田 崇行 ― 日本の各産地を一つに

Tsunehisa isn’t tied to one workshop – it’s a celebration of all Japan’s great knife regions. Think Sakai’s laser-precision grinds, Tosa’s mastery of steels like Ginsan, and the distinct traditions of other forging hubs, all united under one brand. By pooling this regional expertise, Tsunehisa delivers exceptional handmade quality at surprisingly accessible prices.

Each knife reflects thoughtful design and rigorous quality control by the Ironclad group (led by Shibata Takayuki). You get authentic techniques – hand-forging, perfect heat treats – paired with modern functionality and Japan's finest steels. Clean aesthetics ensure they look as good as they perform.

Tsunehisa believes a great knife should be a lifelong companion. That’s why they combine serious performance with dedicated after-sales care, including sharpening support. It’s genuine Japanese craftsmanship, distilled for cooks who value both heritage and smart value.

Read more

Forget choosing between Japan's legendary knife-making regions. Tsunehisa brings them all to your kitchen. This innovative brand acts as a curator, sourcing blades from specialist workshops across Sakai, Tosa, and other iconic forging centers – each area contributing its centuries-old expertise. Sakai brings its peerless precision and mastery of carbon steels; Tosa counters with exceptional stainless like the coveted Ginsan (Silver #3); other regions add their own unique forging signatures. This collaborative approach is Tsunehisa’s superpower: harnessing diverse, hyper-specialized skills to create knives offering incredible value without compromising on authentic craftsmanship.

Under the stewardship of Shibata Takayuki's Ironclad group, Tsunehisa maintains a relentless focus on quality and thoughtful design. Experienced staff meticulously inspect every single knife – ensuring consistent geometry, flawless heat treatment, and perfect fit-and-finish before it ever leaves Japan. The result? Blades that feel substantial yet balanced, with grinds that glide through ingredients and steels that take and hold a devastating edge.

Aesthetics are clean, purposeful, and timeless. You won’t find unnecessary ornamentation, but rather a focus on elegant lines, comfortable wa (Japanese) or yo (Western) handles, and finishes that highlight the beauty of the materials – whether it’s the subtle sheen of Ginsan, the rustic charm of kurouchi, or the mesmerizing layers of Damascus cladding.

But Tsunehisa’s commitment extends far beyond the sale. They understand a true kitchen companion needs lifelong support. That’s why they emphasize robust after-sales service, offering maintenance guidance and professional sharpening options to keep your knife performing flawlessly for decades. It’s this combination – regional mastery, rigorous quality control, accessible pricing, and dedicated support – that makes Tsunehisa a standout choice. It’s not just a knife; it’s your gateway to experiencing the breadth and depth of Japan’s blade-making heritage, designed to become an indispensable, cherished part of your cooking journey.

“単一の工房にあらず――柴田が磨き上げた、日本屈指の包丁産地を集めた厳選コレクション”

Est. 2015 | 平成27年
Known for 複数産地から調達した高コスパの包巾を柴田 崇行が最終仕上げ
Read more about 柴田 崇行
柴田 崇行 — 福山
Profile: 筋引
Profile

筋引

筋引

筋引(スジビキとも呼ばれる)は西洋のキッチンで見られるものよりも薄く鋭い刃が特徴的な、日本独自のスライサーです。長い刃体はタンパク質を美しく薄くスライスしたり、テリーヌやパテを繊細に切り分けるのに最適です。刃渡りは210mmから300mmまであり、中でも240mmと270mmはバランスの取れた長さと操作性で特に人気があります。本来の用途で使用した場合、筋引には大きな利点があります。牛刀と比較して刃体が薄いため柔らかいタンパク質との接触面積が少なく、食材が刃に張り付く摩擦を軽減できます。さらに、概ねフラットな輪郭はスライス作業に完璧であり、炭素鋼の芯材と組み合わせれば大型肉塊のポーションカットに最適なツールとなり、時にはメロンカッターとしても活躍します。
Composition

AUS-8 Element Composition

Compare with
    AUS-8
    13.0% 9.8% 6.5% 3.3% 0
    C Carbon 0.7%
    Primary hardening element. Raises hardness and wear resistance — but too much increases brittleness and corrosion susceptibility. As a reference: German 1.4112 (~0.5%) sits at the low end; VG-10 (~1.0%) is a common mid-range; SG2 (1.25–1.45%) and ZDP-189 (~3.0%) represent high and extreme ends respectively.
    C
    0.7%
    Cr Chromium 13.0%
    Raises corrosion resistance; 13%+ qualifies steel as stainless. Also improves hardenability and wear resistance. In kitchen use, higher chromium levels contribute to a slight drag or sticking sensation when cutting — a trade-off for the rust resistance it provides.
    Cr
    13.0%
    V Vanadium 0.1%
    Forms extremely hard carbides for superior edge retention. Also refines grain structure, improving toughness.
    V
    0.1%
    Mo Molybdenum 0.1%
    Improves hardenability and toughness. Boosts corrosion resistance and helps the steel hold hardness under heat.
    Mo
    0.1%
    Si Silicon 1.0%
    Strengthens the steel matrix and acts as a deoxidiser. Improves hardness and resistance to oxidation.
    Si
    1.0%
    P Phosphorus 0.04%
    Impurity from the smelting process. Even small amounts cause brittleness — steelmakers keep this as low as possible.
    P
    0.04%
    S Sulfur 0.03%
    Impurity that reduces toughness and promotes brittleness. Intentionally added only in free-machining steels.
    S
    0.03%
    C — Carbon Cr — Chromium V — Vanadium Mo — Molybdenum Si — Silicon P — Phosphorus S — Sulfur
    Hardness 57–59 HRC
    555759616365+
    Steel
    AUS-8
    Category
    ステンレス鋼
    Manufacturer
    愛知
    Hardness
    57–59 HRC
    Steel

    AUS-8

    • Manufacturer
      • 愛知
    • Nature ステンレス鋼
    • Hardness57–59 HRC
    AUS-8は、しばしば「モリブデンバナジウム鋼」とも呼ばれる日本のステンレス鋼で、手頃な価格、研ぎやすさ、優れた耐食性が高く評価されています。バランスの取れた特性から、初心者の方にもおすすめです。モリブデンとバナジウムの添加により強度、硬度、耐久性が向上し、中級上位の鋼材として位置づけられています。440鋼と比較可能ですが、より優れた硬度と耐食性を誇ります。適切なサブゼロ処理により刃持ちと靭性がさらに向上し、品質と性能を求める製作者やユーザーにとってコストパフォーマンスの高い選択肢となっています。
    Construction: 三枚合わせ・ステンレスクラッド
    Construction

    三枚合わせ・ステンレスクラッド

    三枚合わせ(Sanmai)は両刃包丁に多く見られる構造で、硬い芯鋼の両側に柔らかい地金を鍛接したものです。硬くてもろい芯鋼が熱処理後に鋭い刃先を形成し、柔らかい地金がそれを支えることで、ブレード全体の強度を高めます。

    柔らかい地金は、本焼やモノスチール構造に比べて薄くする工程を容易にします。また、地金にステンレス鋼を使用した場合、炭素鋼やセミステンレス鋼の芯材を錆や変色から守ることができます。

    Finish: 槌目
    Finish

    槌目

    日本の包丁における「槌目」仕上げとは、刃の表面に施された独特のハンマーテクスチャーを指します。この伝統的な技法は、独自の美的魅力を加えるだけでなく、切り分け時の抵抗を減らし、食材が刃に貼り付くのを防ぐといった実用的な利点も提供します。機能性と芸術性を融合させた職人技の証であり、それぞれの包丁を単なる道具ではなく、一つの芸術作品へと昇華させます。

    Handle
    Handle

    洋柄パッカウッド(ボルスター付き)

    • Profile 洋柄(ボルスター付き)
    • Material
      • パッカウッド

    洋柄パッカウッドハンドルはエントリークラスの包丁によく採用される選択肢です。場合によっては、ブレードに溶接されたボルスターが装着されることもあります。パッカウッドは木材を樹脂で積層して作られ、異なる色の層を持つ高密度な素材となります。天然木と比較して、この人工木材は硬度が高く吸水性が低い上、製造コストも抑えられるため、エントリーモデルのグリップとして最適です。

    1 / 5

    You May Also Like