Subscribe to our news letter and enjoy $10 off!

Sukenari  |  SKU: SUKE_HADA_GY210

Sukenari (佑成) HAP40 HSPS Damascus Gyuto 210mm with Wenge wood saya

$908.71
Tax included Shipping calculated at checkout.


Free shipping for knives over AU$200 Australia wide.

210mm HAP40 Damascus Gyuto 210mm with K&S Ebony Handle and Wenge wood Saya

 

============

I am glad to bring you the latest Sukenari offering: the HAP40 High Speed Tool Steel by Hitachi. The HAP40 is a powdered semi-stainless steel, has only about 4% of Chromium. The high Chromium content in stainless steel tends to stick to food and gives a wired sharpening feedback; the HAP40 in contrast behaves like carbon steel yet it won’t rust as easily as traditional carbon steel. One could almost get away with any rust developing on the blade as long as it is cleaned and wiped dry after each prep.

The HAP40 line is heat treated to a staggering HRC 68 +- 0.5. (If you have any double of this, you should read this blog). This is even higher than the Sukenari’s famous ZDP189 line (HRC 66) and the now discontinued Aogami Super Damascus line (HRC 67). You may wonder this is going to be a nightmare to sharpen (since the ZDP189 is bad enough already), but the truth is, it wasn’t that bad. My experience with the Sukenari HAP40 is that it sits between SG2 and ZDP189 in terms of how easy to sharpen. Because the HAP40 is a highly alloyed steel, it won’t be as chippy as the ZDP189 or the water-quenched Aogami Super.

As always, the grind of Sukenari is not the thinnest out there but to me it is still thin enough for most users. The 240 that I tried goes through potato effortlessly, thanks to the super sharp OOTB edge and a very nice geometry. If your task requires an extreme edge retention, the new HAP40 line from Sukenari is a very good alternative (upgrade) to the ZDP189 line.

 

Measurements 

  Measurements

Weight 

170 g

Total Length

351 mm

Tip to Heel Length

204 mm

Blade Height at Heel

47 mm

Width of Spine Above Heel 

2.7 mm

Width of Spine at Middle of Blade

2.3 mm

Width of Spine at about 1cm From the Tip

0.7 mm

Steel

Hitachi HAP40 High Speed Powdered Steel

Hardness

HRC 68 +- 0.5

Handle Design

K&S Handles with various design 

 

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Sukenari

Sukenari (佑成) HAP40 HSPS Damascus Gyuto 210mm with Wenge wood saya

$908.71

210mm HAP40 Damascus Gyuto 210mm with K&S Ebony Handle and Wenge wood Saya

 

============

I am glad to bring you the latest Sukenari offering: the HAP40 High Speed Tool Steel by Hitachi. The HAP40 is a powdered semi-stainless steel, has only about 4% of Chromium. The high Chromium content in stainless steel tends to stick to food and gives a wired sharpening feedback; the HAP40 in contrast behaves like carbon steel yet it won’t rust as easily as traditional carbon steel. One could almost get away with any rust developing on the blade as long as it is cleaned and wiped dry after each prep.

The HAP40 line is heat treated to a staggering HRC 68 +- 0.5. (If you have any double of this, you should read this blog). This is even higher than the Sukenari’s famous ZDP189 line (HRC 66) and the now discontinued Aogami Super Damascus line (HRC 67). You may wonder this is going to be a nightmare to sharpen (since the ZDP189 is bad enough already), but the truth is, it wasn’t that bad. My experience with the Sukenari HAP40 is that it sits between SG2 and ZDP189 in terms of how easy to sharpen. Because the HAP40 is a highly alloyed steel, it won’t be as chippy as the ZDP189 or the water-quenched Aogami Super.

As always, the grind of Sukenari is not the thinnest out there but to me it is still thin enough for most users. The 240 that I tried goes through potato effortlessly, thanks to the super sharp OOTB edge and a very nice geometry. If your task requires an extreme edge retention, the new HAP40 line from Sukenari is a very good alternative (upgrade) to the ZDP189 line.

 

Measurements 

  Measurements

Weight 

170 g

Total Length

351 mm

Tip to Heel Length

204 mm

Blade Height at Heel

47 mm

Width of Spine Above Heel 

2.7 mm

Width of Spine at Middle of Blade

2.3 mm

Width of Spine at about 1cm From the Tip

0.7 mm

Steel

Hitachi HAP40 High Speed Powdered Steel

Hardness

HRC 68 +- 0.5

Handle Design

K&S Handles with various design 

 

View product