Crows Nest store now open, in store specials!

1 11
Nigara Hamono  |  SKU: NG-W1-YAN330

Nigara White 1 Mizu-Honyaki Mt Fuji Hamon Yanagiba 330mm

$3,100.00 $3,600.00
Tax included Shipping calculated at checkout.
Detailed Specifications
Line Nigara Honyaki
Profile Yanagiba
Bevel Type Single Bevel
Weight 319 g        11.25 oz
Edge Length 286 mm   .11.26 inch
Heel Height 43 mm     .1.69 inch
Width @ Spine 4.8 mm     0.19 inch
Width @ Mid 4.0 mm     0.16 inch
Width @ 1cm from Tip 1.3 mm     0.05 inch
Steel White 1 / Shirogami #1 | Carbon
Blade Construction Honyaki
Hardness (HRC) 62 - 65
Surface Finish Etched
Handle Octagonal Birch Burl with Spacer
Region Aomori
Best for
  • Collectors
  • Enthusiasts
    		•
    • Free shipping for knives over AU$200 Australia wide.
    • World-wide shipping via DHL Express, 3 to 5 days.

    Nigara White 1 Mizu-honyaki, Mt Fuji hamon, the Sun is part of tha hamon rather then post-etched. The knife is full of steel banding cloud. 330mm, one only, what is see is what you will get. Comes with a triple spacer ebony handle with blonde horn. 


    Care Instruction
    1. Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
    2. Wash with neutral detergent after use, and wipe dry;
    3. Please don't wash knife with dishwasher, it will damage the wood handle;
    4. Be careful not to leave the knife close to a heat source for a long time;
    5. It is a lot more dangerous to cut with a blunt knife than a sharp knife!
    6. It is best to sharpen a Japanese knife regularly on a waterstone.
    7. Oil the (carbon) knife if storing for an extended period of time to prevent rust.

    Nigara

    Based in the small yet beautiful city of Hirosaki in the northern prefecture of  Aomori, Nigara hamono has been making samurai swords for 350 yearas, with master Kunitoshi  (國俊) being one of the most famous sword smith in his generation. Now headed by the 8th generation mastersmith Tsuyoshi Yoshizawa (吉澤 剛) supported by his father Toshiju Yoshizawa (吉澤 俊寿), Nigara is becoming very popular thanks of its exquisite forging skills and second to none quality control. 

    • Profile: Yanagiba

      The Yanagiba, often simply called Yanagi, stands as a quintessential knife in the Japanese culinary realm, specifically designed for the artful preparation of sashimi, sushi, and sliced raw fish and seafood. As a member of the Sashimi hōchō family, it is celebrated for its long, slender blade that ensures precision cuts with minimal effort. Blade lengths start at approximately 210mm and can extend up to 360mm, with the 240mm and 270mm sizes being the most favored for home use, while professional kitchens frequently opt for 300mm and larger. This knife's design is not just about aesthetics but about fulfilling the precise requirements of Japanese cuisine, making it a vital tool for both amateur and seasoned chefs.

      Slide for more >>

    • Steel: White 1 / Shirogami #1

      White Steel #1, also known as Shirogami #1, stands out in the realm of high-end Japanese cutlery materials for its exceptional purity and performance. It is an advanced version of White Steel No.2, achieved through further refinement and an increased carbon content. This additional carbon allows White No.1 to attain a slightly higher hardness (HRc) than its predecessor, enhancing its ability to be sharpened to an extremely fine edge. However, this increase in carbon also introduces a bit more brittleness to the steel. Despite this, White No.1 is highly favored by professional chefs, especially those specializing in traditional Japanese cuisine, due to its superb edge retention and ease of resharpening. Unlike its Blue Steel counterparts, White No.1 lacks chromium and tungsten, focusing instead on achieving the highest possible sharpness. This characteristic, while offering unparalleled sharpness, means it is more reactive and requires careful maintenance, including prompt wiping and drying after use, to prevent corrosion.

      Manufacturer:

      • Hitachi Special Steel, Japan

      Nature: Carbon

      Hardness: 62- 65

      << Slide for more >>

    • Handle Specs

      Profile: Octagonal WA

      Material:

      • Birch Burl Stabilized

      The stabilized birch burl handle adorning the Hatsukokoro chef knife is a testament to both exquisite craftsmanship and natural beauty. Birch burl, prized for its intricate grain patterns and unique textures, undergoes a meticulous stabilization process to enhance its durability and stability, ensuring longevity and resilience against moisture and wear.

      The handle's ergonomic design offers a comfortable and secure grip, allowing for extended periods of use without fatigue. Its smooth contours and balanced weight distribution contribute to precise control and effortless maneuverability during culinary tasks.

      The natural variations in color and grain of the birch burl create a visually captivating aesthetic, making each handle distinctively unique. This harmonious blend of functionality and aesthetics not only elevates the chef knife's performance but also adds a touch of elegance to the kitchen, reflecting the unparalleled craftsmanship of Hatsukokoro knives.

      << Slide for more

    Nigara Hamono

    Nigara White 1 Mizu-Honyaki Mt Fuji Hamon Yanagiba 330mm

    $3,100.00 $3,600.00

    Nigara White 1 Mizu-honyaki, Mt Fuji hamon, the Sun is part of tha hamon rather then post-etched. The knife is full of steel banding cloud. 330mm, one only, what is see is what you will get. Comes with a triple spacer ebony handle with blonde horn. 

    View product
    Back to top