Hatsukokoro Ginrei Ginsan K-tip Gyuto 210mm Nashiji Ebony
Hatsukokoro Ginrei Ginsan K-tip Gyuto 210mm Nashiji Ebony is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Hatsukokoro Ginrei Ginsan Nashiji |
| Profile | K-tip Gyuto / K-tip chef's knife |
| Bevel Type | Double Bevel |
| Weight | 178 g | 6.3 oz |
| Edge Length | 214 mm | 8 27/64″ |
| Heel Height | 51 mm | 2 1/64″ |
| Width @ Heel | 2.0 mm | 5/64″ |
| Width @ Mid | 2.0 mm | 5/64″ |
| Width @ 1cm from Tip | 1.0 mm | 3/64″ |
| Steel | Ginsan / Silver #3 | Stainless |
| Blade Construction | Sanmai - Stainless Clad |
| Typical hardness | 60 to 62 HRC |
| Surface Finish | Nashiji |
| Handle | Octagonal Ebony |
| Region | Hyogo |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

K-tip Gyuto
切付牛刀
K-tip chef's knife · Double bevel
Double-bevel chef's knife with an angled tip and flatter edge for push cuts and scoring.
Read more-
Hardness
Good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 60 to 62 HRC
-
Edge retention
Good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from AEB-L (360 mm of test card cut at 61.1 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 60.5 HRC, the usual hardness makers sell it at.
-
Toughness
Very high
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
High
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
High
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
Ginsan / Silver #3
GIN3
Stainless · Hitachi Metals (now Proterial)
Proterial's GIN 3 stainless: 0.95 to 1.10% carbon, 13.00 to 14.50% chromium, hardening hardness over 59 HRC.
Read moreSanmai - Stainless Clad
三枚
3 layers · stainless clad
Hard core between two stainless layers, bare only at the edge; the cladding resists rust.
Read more
Nashiji
Pear-skin texture
A fine matte texture like the skin of a nashi pear. It may help food release.
Read more
Octagonal Ebony
Octagonal WA
Dense, dark ebony in the eight-sided wa shape. The flats give a sure grip for either hand.
Frequently asked questions
Is a K-tip Gyuto the same as a traditional Kiritsuke?
What is Ginsan steel, and why do some Japanese knives use it?
Is Ginsan stainless?
What is the Hatsukokoro Ginrei Ginsan Nashiji knife line, and who is it for?
Is Hatsukokoro a maker or a brand, and who makes the knives?
What does the name Hatsukokoro mean?
Which Hatsukokoro line should I pick, carbon or stainless?
You May Also Like
-
Hatsukokoro Ginrei Ginsan K Tip Petty 120mm Nashiji EbonySale price $77.00 Regular price $90.00Unit price
-
Hatsukokoro Ginrei Ginsan Santoku 175mm Nashiji EbonySale price $89.00 Regular price $110.00Unit price
-
Hatsukokoro Ginrei Ginsan Bunka 175mm Nashiji EbonySale price $89.00 Regular price $111.00Unit price
-
Hatsukokoro Ginrei Ginsan Small Gyuto / Tall Petty 150mm Nashiji EbonySale price $94.00 Regular price $110.00Unit price
-
Hatsukokoro Ginrei Ginsan Petty 130mm Nashiji EbonySale price $69.00 Regular price $86.00Unit price
-
Hatsukokoro Hayabusa ATS34 Sanmai Petty 150mmSale price $126.00 Regular price $148.00Unit price
-
Hatsukokoro Blue 2 Damascus Migaki Santoku 180mm Ebony HandleSale price $157.00 Regular price $185.00Unit price
-
Hatsukokoro Sumi Blue 2 Kurouchi Santoku 165mm Black Chacate HandleSale price $84.00 Regular price $99.00Unit price









