Hatsukokoro Hayabusa ZDP189 Migaki Gyuto 210mm
Hatsukokoro Hayabusa ZDP189 Migaki Gyuto 210mm is backordered and will ship as soon as it is back in stock.
Pickup in Australia only
In Stock Now
-
Hatsukokoro Hayabusa ATS34 Sanmai Petty 150mmSale price $126.00 Regular price $148.00Unit price
-
Hatsukokoro Blue 2 Damascus Migaki Santoku 180mm Ebony HandleSale price $157.00 Regular price $185.00Unit price
-
Hatsukokoro Sumi Blue 2 Kurouchi Santoku 165mm Black Chacate HandleSale price $84.00 Regular price $99.00Unit price
-
Sukenari ZDP-189 Hairline Gyuto 270mm, Slim Ebony MosaicSale price $418.00 Regular price $492.00Unit price
-
Sukenari ZDP-189 Damascus Kiritsuke (K-tip) Gyuto 240mm Birch Burl HandleSale price $455.00 Regular price $535.00Unit price
-
Sukenari ZDP-189 Damascus Gyuto 240mm Birch Burl HandleSale price $455.00 Regular price $535.00Unit price
-
Takeshi Saji SG2 Diamond Damascus Gyuto 240mm Ebony HandleSale price $444.00 Regular price $522.00Unit price
-
Takeshi Saji SG2 Diamond Damascus Gyuto 270mm Ebony Handle Horn FerruleSale price $491.00 Regular price $578.00Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Hatsukokoro Hayabusa ZDP-189 |
| Profile | Gyuto / Chef's knife |
| Bevel Type | Double Bevel |
| Weight | 130 g | 4.6 oz |
| Edge Length | 209 mm | 8 15/64″ |
| Heel Height | 46 mm | 1 13/16″ |
| Width @ Heel | 2.3 mm | 3/32″ |
| Width @ Mid | 1.7 mm | 1/16″ |
| Width @ 1cm from Tip | 0.7 mm | 1/32″ |
| Steel | ZDP-189 | Powdered | Stainless |
| Blade Construction | Sanmai - Stainless Damascus Clad |
| Maker's hardening hardness | 65 HRC or more |
| Surface Finish | Migaki |
| Handle | Octagonal Teak Black Ferrule |
| Region | Hyogo |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

Gyuto
牛刀
Chef's knife · Double bevel
Double-bevel all-purpose chef's knife with a pointed tip; thinner than a Western one.
Read more-
Hardness
Extremely high
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Maker's hardening hardness: 65 HRC or more
-
Edge retention
Extremely high
How long the edge stays sharp in kitchen use before it needs sharpening. Lab figure: 718 mm of test card cut at 65.1 HRC (ZDP-189, Knife Steel Nerds CATRA test, 2020). Hardness used: 65.5 HRC, the usual hardness makers sell it at.
-
Toughness
Low
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Fair
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Low
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Fair
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
ZDP-189
粉末ダイス鋼 ZDP-189
Stainless · Hitachi Metals (now Proterial)
Proterial powder stainless, 3% carbon, 20% chromium, hardening hardness over 65 HRC. Long edge; slow to sharpen.
Read moreSanmai - Stainless Damascus Clad
三枚ダマスカス
3 layers · damascus clad
Hard core between stainless damascus layers, bare at the edge. Thinning wears the pattern.
Read more
Migaki
Polished satin
Smooth polished surface, satin to soft sheen rather than mirror. Scratches show.
Read more
Octagonal Teak Black Ferrule
Octagonal WA
Golden-brown teak, eight-sided, with a black buffalo horn ferrule. Teak resists moisture.








