Knives and Stones  |  SKU: HST-SHGA-GIN3-KYAN300EB

Hatsukokoro x Myojin Shirasagi Ginsan K-tip Yanagiba 300mm

Sale price $220.00 Regular price $258.00

Availability

Goes well with

Detailed Specifications
Line Hatsukokoro Shirasagi Ginsan Kasumi
Profile K-tip Yanagiba / K-tip sashimi knife
Bevel Type Single Bevel
Weight 229 g | 8.1 oz
Edge Length 300 mm | 11 13/16″
Heel Height 37 mm | 1 29/64″
Width @ Heel 3.2 mm | 1/8″
Width @ Mid 3.1 mm | 1/8″
Width @ 1cm from Tip 1.5 mm | 1/16″
Steel Ginsan / Silver #3 | Stainless
Blade Construction Nimai - Stainless Clad
Typical hardness 60 to 62 HRC
Surface Finish Kasumi
Handle Octagonal Ebony with Black Horn Ferrule
Region Tosa
Best for
  • Pro chefs
  • Enthusiasts

World-wide shipping via DHL Express, 3 to 6 days (not available in the UK).



The Shirasagi family from Hatsukokoro contains a series of single bevel knives sharpened at Myojin Riki Seisakusho - a workshop from Kochi prefecture that is well know for its top notch sharpening and polishing. This Ginsan stainless steel line is a great complement to the existing Blue/White 2 Shirasagi, offering another low maintenance Ginsan steel Deba at a reasonable price.

The Shirasagi Ginsan have demonstrated a consistent level of finish that we expect from Myojin Riki, the spine is well rounded, the smoothened coil and other corners fall into smoothly polished surfaces, the Migaki is done well on the Hira and the bevel have a contrasting Kasumi, with scratches oriented towards different directions to create a sharp Shinogi line. The blade is forged in a distinct Tosa manner, with curved and tapered Machi and a more round look compare to the typical Sakai counterparts.

These knives are positioned a bit lower than the Sakai Takayuki Gintan line in price, and they are very similar in terms of their features and performance. It's always good to have another option, not to mention it's a more budget friendly one in rather niche category of Ginsan Deba.

Pros Cons
  • Great for professionals
  • Easy to look after
  • Excellent fit and finish
  • Need some work on the blade
Care Instruction
  1. Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
  2. Wash with neutral detergent after use, and wipe dry;
  3. Please don't wash knife with dishwasher, it will damage the wood handle;
  4. Be careful not to leave the knife close to a heat source for a long time;
  5. It is a lot more dangerous to cut with a blunt knife than a sharp knife!
  6. It is best to sharpen a Japanese knife regularly on a waterstone.

Myojin Riki

Myojin Riki Seisakusho, a Tosa knife workshop

The workshop 明神利器製作所, whose knives we list as Myojin Riki, is in Susaki, Kochi. Kochi City's craft page names its second generation as 明神 直人.

Kochi City's page on Tosa crafts describes the workshop as carrying work from forging to finishing in one continuous process. The page says it sharpens a hamaguri-ba (蛤刃) edge, ground convex, a technique the workshop's second generation learned through several years of training in Fukui, and that it also takes sharpening-only orders from outside Kochi Prefecture.

Among the lines we list, the Hatsukokoro x Myojin Shirasagi single-bevel knives cover Blue 2 kurouchi yanagiba, K-tip yanagiba, sakimaru yanagiba and honesuki, White 2 deba, left-handed mioroshi deba, left-handed yanagiba and honesuki, and a Ginsan yanagiba. We also list Myojin Cobalt Special gyuto, santoku and bunka.

“A Tosa workshop in Susaki, Kochi, described by Kochi City's craft page as working from forging through finishing.”

Known for A convex hamaguri-ba edge, as Kochi City's craft page describes
Instagram @tetsujin_labo Read more about Myojin Riki

Myojin Riki · Tosa

Knife details

K-tip Yanagiba — knife profile
Profile

K-tip Yanagiba

切付柳刃

K-tip sashimi knife · Single bevel

Single-bevel sashimi slicer with an angled tip and flatter front; also does garnish work.

Read more
Steel properties
  1. Hardness Good
  2. Edge retention Good
  3. Toughness Very high
  4. Rust resistance High
  5. Ease of sharpening High
  6. Sharpness High
Our ratings, inferred from published lab tests and composition.

Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.

Steel

Ginsan / Silver #3

GIN3

Stainless · Hitachi Metals (now Proterial)

Proterial's GIN 3 stainless: 0.95 to 1.10% carbon, 13.00 to 14.50% chromium, hardening hardness over 59 HRC.

Read more
ShinogiCladdingClad lineHard steelHollow back
Construction

Nimai - Stainless Clad

二枚・ステンレス

2 layers · single bevel

Two layers, single bevel: hard steel on the back, stainless cladding over the other.

Read more
Kasumi — blade surface finish
Finish

Kasumi

Misty polish

Hazy, matte bevel where soft iron meets hard core steel. The iron patinas and rusts.

Read more
Octagonal Ebony with Black Horn Ferrule handle
Handle

Octagonal Ebony with Black Horn Ferrule

Octagonal WA

Ebony, eight-sided, with a black buffalo horn ferrule: the standard all-black wa handle.

Frequently asked questions

What is Ginsan steel, and why do some Japanese knives use it?

Ginsan, also known as Silver 3, is a stainless steel from Proterial, the Yasugi Specialty Steel division. Proterial describes it as a stainless steel which has hardness and sharpness comparable to carbon steel, and lists its uses as kitchen knives and scissors.

Knife makers use it when they want the corrosion resistance of a stainless together with the hardness and sharpness that Proterial compares to carbon steel. The steel maker lists 59 HRC or over after hardening, but that is a heat treatment figure, not a finished knife figure.

Dry it after use, like any stainless knife. Its performance depends on the heat treatment and construction of the specific knife, not the steel name alone.

Is Ginsan stainless?

Yes. Proterial lists the steel as GIN 3 with 13.00 to 14.50% chromium, above the Japan Stainless Steel Association's 10.5% minimum for stainless steel.

Proterial describes it as a stainless steel with hardness and sharpness comparable to carbon steel, used in various kitchen knives and scissors, and the association notes that stainless, strictly, means it rusts less. Wash the knife and dry it after use.

What is the Hatsukokoro Shirasagi Ginsan Kasumi knife line, and who is it for?

The Hatsukokoro Shirasagi Ginsan Kasumi line consists of single-bevel knives made from Ginsan stainless steel and sharpened at the Myojin Riki Seisakusho workshop in Kochi, designed primarily for professional chefs and enthusiasts who want a lower-maintenance alternative to carbon steel Debas.

The flat of the blade (Hira) is polished to a Migaki finish and the bevel has a contrasting misty Kasumi finish, with the scratches set in different directions to give a crisp Shinogi line. The blades may need some initial work on arrival. The line is positioned as a practical option for those needing a reliable Deba without the high upkeep of traditional carbon steels, offering a consistent level of fit and finish on the spine and corners.

If you are looking for a specific in-stock example, the Hatsukokoro x Myojin Shirasagi Ginsan Ko Deba 120mm is available at an entry-level price, while the larger Hatsukokoro x Myojin Shirasagi Ginsan Deba 180mm sits at the higher end of the range.

What is the hamaguri-ba edge on the knives we list as Myojin Riki?

A hamaguri-ba edge, written 蛤刃, is a convex edge shape, and it is the shape the workshop 明神利器製作所 sharpens its knives to. Kochi City's craft page records that the workshop's second generation, whose name the page gives as 直人, learned it over several years of training in Fukui.

The same page says the workshop also takes sharpening-only orders from outside Kochi.

Does Myojin Riki forge its own knives?

Yes. Kochi City's craft page for his workshop 明神利器製作所 says the work runs from forging through finishing in one continuous process, 鍛造から仕上げまで一貫して行う.

That page lists the workshop in Susaki, Kochi.

Are Myojin Riki knives worth it?

We think so, and mostly for the edge. The workshop 明神利器製作所, whose knives we list as Myojin Riki, is in Susaki, Kochi. Kochi City's craft page says it takes its knives from forging to finishing in one process, and that its second generation, 明神 直人, does the sharpening. He learned the hamaguri-ba (蛤刃) edge during several years of training in Fukui.

That page says the edge is ground with a slight roundness toward the cutting edge, neither too thin nor too thick. It says a knife finished this way bites into food well, cuts cleanly and releases food well.

We list Hatsukokoro x Myojin Shirasagi knives in White #2 and Blue #2 steel, including yanagiba, deba and usuba, and Myojin Cobalt Special knives. Stock changes, so check each listing. The Myojin Riki maker page has more on the workshop.

You May Also Like