Yoshimi Kato Kintaro Aogami Super Damascus KU Nashiji Bunka 180mm
Yoshimi Kato Kintaro Aogami Super Damascus KU Nashiji Bunka 180mm is backordered and will ship as soon as it is back in stock.
Pickup in Australia only
In Stock Now
-
Nao Yamamoto Blue Super Kurouchi Damascus Gyuto 240mmSale price $382.00 Regular price $449.00Unit price
-
Hatsukokoro Shinkiro Aogami Super Gyuto 240mm Damascus Kurouchi Birch HandleSale price $392.00 Regular price $461.00Unit price
-
Kurogane Blue 2 Kurouchi Bunka 165mm B-Grade, Ebony HandleSale price $68.00 Regular price $97.00Unit price
-
Naoto Blue 1 Damascus Kurouchi Bunka 180mmSale price $183.00 Regular price $215.00Unit price
-
K&S Yuepo SLD Nashiji Bunka 180mm, Ebony HandleSale price $94.00 Regular price $110.00Unit price
-
K&S Arare SG2 Bunka 170mm by Iron Clad, with Black Charcate HandleSale price $147.00 Regular price $172.00Unit price
-
Sakai Takayuki VG10 Bunka 160mm 33-Layer Hammered DamascusSale price $131.00 Regular price $154.00Unit price
-
Takeshi Saji Maki-e Urushi VG10W Bunka 165mmSale price $835.00 Regular price $983.00Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Yoshimi Kato Aogami Super Kurouchi Damascus |
| Profile | Bunka / K-tip santoku |
| Bevel Type | Double Bevel |
| Weight | 138 g | 4.9 oz |
| Edge Length | 173 mm | 6 13/16″ |
| Heel Height | 46 mm | 1 13/16″ |
| Width @ Heel | 2.6 mm | 7/64″ |
| Width @ Mid | 2.0 mm | 5/64″ |
| Width @ 1cm from Tip | 0.9 mm | 1/32″ |
| Steel | Blue Super / Aogami Super | Carbon |
| Blade Construction | Sanmai - Soft Iron Damascus Clad |
| Typical hardness | 62 to 65 HRC |
| Surface Finish | Kurouchi |
| Handle | Octagonal Black Chacate |
| Region | Echizen |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
- Oil the (carbon) knife if storing for an extended period of time to prevent rust.
Knife details

Bunka
文化
K-tip santoku · Double bevel
A compact all-rounder like a santoku; a Sakai maker says its angled K-tip suits fine work.
Read more-
Hardness
Very high
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 62 to 65 HRC
-
Edge retention
Very good
How long the edge stays sharp in kitchen use before it needs sharpening. Lab figure: 338 mm of test card cut at 65.1 HRC (Aogami Super, Knife Steel Nerds CATRA test, 2020). Hardness used: 64 HRC, the usual hardness makers sell it at. Carbon steels score lower on this abrasive test, which is why our grade also counts hardness.
-
Toughness
Good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Low
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Good
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
High
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
Blue Super / Aogami Super
青紙スーパー
Carbon · Hitachi Metals (now Proterial)
Proterial carbon steel, 1.45% carbon, tungsten and vanadium, hardening hardness over 60 HRC. Long edge; rusts.
Read moreSanmai - Soft Iron Damascus Clad
三枚・軟鉄ダマスカス
3 layers · iron damascus clad
Hard core between two soft iron damascus layers. The iron patinas and rusts; keep it dry.
Read more
Kurouchi
Black forge scale
Dark forge scale left on the upper blade. The bevel and edge still need care.
Read more
Octagonal Black Chacate
Octagonal WA
Black chacate, a dense dark African wood near ebony, eight-sided; may show pale sapwood.








