Nakagawa Left Hand Ginsan Honesuki 150 mm Kasumi Ebony
Nakagawa Left Hand Ginsan Honesuki 150 mm Kasumi Ebony is backordered and will ship as soon as it is back in stock.
Pickup in Australia only
In Stock Now
-
Nakagawa Ginsan Yanagiba 270 / 300 / 330 mm Mirror Polished Finish, Left-HandedSale priceFrom $394.00 Regular price $463.00Unit price
-
Yoshihiro Ginsan K-tip Yanagiba 390mm w/ Double Fuller and Ebony HandleSale price $1,155.00 Regular price $1,359.00Unit price
-
Yoshihiro Ginsan Yanagiba 360mm w/ Double Fullers and Ebony HandleSale price $840.00 Regular price $988.00Unit price
-
Yoshihiro Ginsan Sakimaru Yanagiba 360mm w/ Double Fullers and Ebony HandleSale price $888.00 Regular price $1,044.00Unit price
-
Yoshihiro Ginsan K-tip Yanagiba 330mm w/Double Fuller, Ebony Handle Mosaic PinSale price $788.00 Regular price $927.00Unit price
-
Tsunehisa Ginsan Nashiji Petty 150mm Ebony HandleSale price $89.00 Regular price $105.00Unit price
-
Hatsukokoro Ginsan Kurouchi Damascus Santoku 170mm Carbon Fibre HandleSale price $420.00 Regular price $494.00Unit price
-
Hatsukokoro Ginsan Kurouchi Damascus Gyuto 240mm Carbon Fibre HandleSale price $473.00 Regular price $556.00Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Hatsukokoro by Nakagawa Ginsan Single Bevel Kasumi |
| Profile | Honesuki / Poultry boning knife |
| Bevel Type | Single Bevel |
| Weight | 120 g | 4.2 oz |
| Edge Length | 140 mm | 5 33/64″ |
| Heel Height | 37 mm | 1 29/64″ |
| Width @ Heel | 2.3 mm | 3/32″ |
| Width @ Mid | 1.8 mm | 5/64″ |
| Width @ 1cm from Tip | 1.1 mm | 3/64″ |
| Steel | Ginsan / Silver #3 | Stainless |
| Blade Construction | Nimai - Stainless Clad |
| Typical hardness | 60 to 62 HRC |
| Surface Finish | Kasumi |
| Handle | Octagonal Ebony |
| Region | Sakai |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

Honesuki
骨スキ
Poultry boning knife · Single or double bevel
Strips meat from bone; a Seki maker lists its square honesuki for fowl and fish.
Read more-
Hardness
Fair
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 60 to 62 HRC
-
Edge retention
Good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from AEB-L (360 mm of test card cut at 61.1 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 60.5 HRC, the usual hardness makers sell it at.
-
Toughness
High
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
High
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
High
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
Ginsan / Silver #3
GIN3
Stainless · Hitachi Metals (now Proterial)
Proterial's GIN 3 stainless: 0.95 to 1.10% carbon, 13.00 to 14.50% chromium, hardening hardness over 59 HRC.
Read moreNimai - Stainless Clad
二枚・ステンレス
2 layers · single bevel
Two layers, single bevel: hard steel on the back, stainless cladding over the other.
Read more
Kasumi
Misty polish
Hazy, matte bevel where soft iron meets hard core steel. The iron patinas and rusts.
Read more
Octagonal Ebony
Octagonal WA
Dense, dark ebony in the eight-sided wa shape. The flats give a sure grip for either hand.











