Nakagawa Left Handed Blue 1 Damascus Yanagiba 240/270/300/300 mm
Nakagawa Left Handed Blue 1 Damascus Yanagiba 240/270/300/300 mm - 240 mm is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Hatsukokoro x Nakagawa Blue 1 Damascus Single Bevel |
| Profile | Yanagiba / Sashimi knife |
| Steel | Blue 1 / Aogami #1 | Carbon |
| Blade Construction | Nimai - Soft Iron Damascus Clad |
| Typical hardness | 61 to 64 HRC |
| Surface Finish | Kasumi |
| Handle | |
| Region | Sakai |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
- Oil the (carbon) knife if storing for an extended period of time to prevent rust.
Knife details

Yanagiba
柳刃
Sashimi knife · Single bevel
Long single-bevel sashimi slicer with a pointed tip. One clean draw cuts raw fish.
Read more-
Hardness
Good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 61 to 64 HRC
-
Edge retention
Very good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from V-Toku2 (314 mm of test card cut at 63.6 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 63 HRC, the usual hardness makers sell it at. Carbon steels score lower on this abrasive test, which is why our grade also counts hardness.
-
Toughness
Good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Low
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Very high
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
Blue 1 / Aogami #1
青一鋼
Carbon · Hitachi Metals (now Proterial)
Proterial carbon steel, 1.25 to 1.35% carbon with chromium and tungsten; not stainless.
Read moreNimai - Soft Iron Damascus Clad
二枚・軟鉄ダマスカス
2 layers · single bevel
Two layers, single bevel: hard steel on the back, iron damascus elsewhere; it rusts.
Read more
Kasumi
Misty polish
Hazy, matte bevel where soft iron meets hard core steel. The iron patinas and rusts.
Read moreFrequently asked questions
What is a yanagiba knife used for in sushi preparation?
What size yanagiba should I buy?
Can a yanagiba cut through fish bones?
Takohiki or yanagiba: what is the difference?
Sujihiki or yanagiba: which do I need?
Will a carbon steel knife rust, and how do I look after it?
What is the difference between Blue 1 and Blue 2?
Are Hatsukokoro x Nakagawa knives forged by Satoshi Nakagawa?
You May Also Like
-
Nakagawa Blue 1 Damascus Yanagiba 240/270/300 /330 mmSale priceFrom $315.00 Regular price $371.00Unit price
-
Nakagawa Ginsan Yanagiba 270 / 300 / 330 mm Mirror Polished Finish, Left-HandedSale priceFrom $394.00 Regular price $463.00Unit price
-
Naoto Blue 1 Damascus Kurouchi Bunka 180mmSale price $184.00 Regular price $217.00Unit price
-
Naoto Blue 1 Damascus Kurouchi Santoku 180mmSale price $184.00 Regular price $217.00Unit price
-
Hatsukokoro Blue 1 Kasumi Gyuto 210mmSale price $183.00 Regular price $229.00Unit price
-
Exotic: Yoshikazu Ikeda Blue #1 Mizu-Honyaki Yanagiba 300mm / Moribashi Set #1Sale price $2,363.00 Regular price $2,779.00Unit price
-
Sakai Takayuki GinRyu (銀龍) Swedish Steel Honyaki Yanagiba 300mm, Marble Horn Ebony HandleSale price $630.00 Regular price $741.00Unit price
-
Yoshihiro Ginsan Yanagiba 360mm w/ Double Fullers and Ebony HandleSale price $840.00 Regular price $988.00Unit price












