Hatsukokoro Ginrei Ginsan K Tip Petty 120mm Nashiji Ebony
Hatsukokoro Ginrei Ginsan K Tip Petty 120mm Nashiji Ebony is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Goes well with
Detailed Specifications
| Line | Hatsukokoro Ginrei Ginsan Nashiji |
| Profile | K-tip Petty / K-tip utility knife |
| Bevel Type | Double Bevel |
| Weight | 75 g | 2.6 oz |
| Edge Length | 110 mm | 4 21/64″ |
| Heel Height | 30 mm | 1 3/16″ |
| Width @ Heel | 2.1 mm | 5/64″ |
| Width @ Mid | 1.8 mm | 5/64″ |
| Width @ 1cm from Tip | 0.9 mm | 1/32″ |
| Steel | Ginsan / Silver #3 | Stainless |
| Blade Construction | Sanmai - Stainless Clad |
| Typical hardness | 60 to 62 HRC |
| Surface Finish | Nashiji |
| Handle | Octagonal Ebony |
| Region | Hyogo |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

K-tip Petty
切付ペティ
K-tip utility knife · Double bevel
Small double-bevel utility knife with an angled point and flatter edge for precise work.
Read more-
Hardness
Good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 60 to 62 HRC
-
Edge retention
Good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from AEB-L (360 mm of test card cut at 61.1 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 60.5 HRC, the usual hardness makers sell it at.
-
Toughness
Very high
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
High
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
High
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
Ginsan / Silver #3
GIN3
Stainless · Hitachi Metals (now Proterial)
Proterial's GIN 3 stainless: 0.95 to 1.10% carbon, 13.00 to 14.50% chromium, hardening hardness over 59 HRC.
Read moreSanmai - Stainless Clad
三枚
3 layers · stainless clad
Hard core between two stainless layers, bare only at the edge; the cladding resists rust.
Read more
Nashiji
Pear-skin texture
A fine matte texture like the skin of a nashi pear. It may help food release.
Read more
Octagonal Ebony
Octagonal WA
Dense, dark ebony in the eight-sided wa shape. The flats give a sure grip for either hand.
Frequently asked questions
What is Ginsan steel, and why do some Japanese knives use it?
Is Ginsan stainless?
What is the Hatsukokoro Ginrei Ginsan Nashiji knife line, and who is it for?
Is Hatsukokoro a maker or a brand, and who makes the knives?
What does the name Hatsukokoro mean?
Which Hatsukokoro line should I pick, carbon or stainless?
You May Also Like
-
Hatsukokoro Ginrei Ginsan K-tip Gyuto 210mm Nashiji EbonySale price $186.98 Regular price $219.95Unit price
-
Hatsukokoro Ginrei Ginsan Santoku 175mm Nashiji EbonySale price $143.99 Regular price $178.95Unit price
-
Hatsukokoro Ginrei Ginsan K-tip Gyuhiki 205mm Nashiji EbonySale price $169.98 Regular price $199.95Unit price
-
Hatsukokoro Ginrei Ginsan Bunka 175mm Nashiji EbonySale price $143.99 Regular price $179.95Unit price
-
Hatsukokoro Ginrei Ginsan Nakiri 165mm Nashiji EbonySale price $152.98 Regular price $179.95Unit price
-
Hatsukokoro Ginrei Ginsan Small Gyuto / Tall Petty 150mm Nashiji EbonySale price $152.98 Regular price $178.95Unit price
-
Hatsukokoro Ginrei Ginsan Petty 130mm Nashiji EbonySale price $111.99 Regular price $138.95Unit price
-
Hatsukokoro Hayabusa ATS34 Sanmai Petty 150mmSale price $203.98 Regular price $239.95Unit price






