Yoshikazu Ikeda Honyaki Sakimaru Sujihiki 450mm White 3 Steel

Between 210 and 270 mm, depending on where it will work. One Japanese maker lists 210 to 240 mm, double-bevel, for home use and 240 to 270 mm, single- or double-bevel, for professional kitchens.

Another, in Sakai, recommends 240 mm at home, with the size of your board in mind, and 270 mm for professional use.

A sujihiki is a double bevel meat slicer: long, narrow, and made for dividing larger pieces of meat into their parts and for slicing roasts. A Sakai knife maker notes that some cooks also use its shape as a double bevel sashimi knife, so it is not limited to meat.

A yanagiba is the single bevel sashimi knife, cut in one pulling stroke from heel to tip. A single bevel cuts thinner, but it needs practice and is handed. A yanagiba edge is too acute for bone or other hard things, so it stays in the sashimi role. The usual lengths differ by job: sujihiki around 240 to 300 mm, yanagiba around 270 to 330 mm.

Choose the sujihiki for meat and general slicing, with sashimi as a secondary use. Choose the yanagiba when traditional single bevel sashimi work is the main job and you are ready for the handling and sharpening that construction requires.

Proterial, which makes Shirogami 3 (白紙3号), lists it for chisels, sickles, axes, planes, gravers, kitchen knives and saws, and describes it as a carbon steel with minimum impurities and middle hardness.

Its page gives the steel 0.80 to 0.90% carbon, and as a carbon steel it can rust, so wash the knife and dry it after use.

White 1, White 2 and White 3 are Proterial's Shirogami 1, Shirogami 2 and Shirogami 3. Proterial lists carbon at 1.25 to 1.35% for Shirogami 1, 1.05 to 1.15% for Shirogami 2 and 0.80 to 0.90% for Shirogami 3, with the same silicon and manganese ranges for all three and no chromium listed.

Proterial describes all three as carbon steel with minimum impurities, at highest, high and middle hardness in that order, and gives a hardening hardness of over 60 HRC for each.

Mizu honyaki (水本焼) is water-quenched honyaki, and Yoshikazu Ikeda's own page says it is one of the professional Japanese knives he mainly makes. The Ikeda honyaki we list under titles that say Mizu-Honyaki are water-quenched.

On hardening, Ikeda says on the City of Sakai film site that the fire's temperature is everything and that he judges it by the colour of the flame. Honyaki can run about 1 to 2 HRC harder than comparable non-honyaki knives, and how much varies by maker.

Yoshikazu Ikeda (池田美和) of Ikeda Tanrenjo (池田鍛錬所) in Sakai, who began making knives under his father, a blacksmith, in 1967 and went independent as Ikeda Tanrenjo in 1983.

The City of Sakai's register lists him under forging (鍛冶), certified in 1988.

Yes. His profile page records his certification as a traditional craftsman by Japan's Minister of Economy, Trade and Industry in 1988.

The same page dates his start in knives to 1967, working under his father, a blacksmith, and records the workshop's independence as Ikeda Tanrenjo in 1983.