Nakagawa White Steel Honyaki Sakimaru Takobiki 300mm Mirror Polish
Nakagawa White Steel Honyaki Sakimaru Takobiki 300mm Mirror Polish is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Goes well with
Detailed Specifications
| Line | Nakagawa Honyaki |
| Profile | Sakimaru Takohiki / Round-tip sashimi knife |
| Steel | White 3 / Shirogami #3 | Carbon |
| Blade Construction | Honyaki |
| Maker's hardening hardness | 60 HRC or more |
| Surface Finish | Mirror Polish |
| Handle | |
| Region | Sakai |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
- Oil the (carbon) knife if storing for an extended period of time to prevent rust.
Knife details

Sakimaru Takohiki
先丸蛸引き
Round-tip sashimi knife · Single bevel
A takohiki with a sword-shaped tip, says a Sakai maker; pulls sashimi along the whole blade.
Read more-
Hardness
Fair
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Maker's hardening hardness: 60 HRC or more
-
Edge retention
Low
How long the edge stays sharp before it needs sharpening. Our number comes from a lab test that counts how much card a blade cuts before it dulls. Based on a lab wear test of this steel or the closest tested one. It measures how long an edge lasts, not how sharp it gets.
-
Toughness
High
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Low
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Very high
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Very high
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
White 3 / Shirogami #3
白三鋼
Carbon · Hitachi Metals (now Proterial)
Proterial (formerly Hitachi Metals) carbon steel, 0.8% carbon, hardening hardness over 60 HRC. More forgiving than White 1 or 2; rusts.
Read moreHonyaki
本焼
One steel · differential hardening
One steel, only the edge hardened, showing a hamon. Mostly carbon (rusts); some stainless.
Read more
Mirror Polish
Mirror polish
Polished to a true mirror that shows hamon or damascus clearly. Every scratch shows.
Read moreFrequently asked questions
Takohiki or yanagiba: what is the difference?
What is White 3 steel used for?
What is the difference between White 1, White 2 and White 3?
Are Hatsukokoro x Nakagawa knives forged by Satoshi Nakagawa?
Ginsan, Blue 1 or Blue 2: which Nakagawa steel should I pick?
You May Also Like
-
Nakagawa Ginsan Yanagiba 270 / 300 / 330 mm Mirror Polished Finish, Left-HandedSale priceFrom $636.98 Regular price $749.00Unit price
-
Hatsukokoro x Myojin Shirasagi Blue 2 Kurouchi Sakimaru Yanagiba 270mmSale price $356.98 Regular price $419.95Unit price
-
Sukenari SG2 Nimai Sakimaru Takobiki 330mm, Ebony Handle Horn FerruleSale price $1,104.98 Regular price $1,299.95Unit price
-
Shigeki Tanaka VG10 Damascus Sakimaru-Takobiki 300mm w/ SayaSale price $1,104.98 Regular price $1,299.95Unit price
-
Yamawaki Ginsan Sakimaru Yanagiba 360mm w/ Double Fullers and Ebony HandleSale price $1,436.98 Regular price $1,689.95Unit price
-
Hatsukokoro x Myojin Shirasagi White 2 Sakimaru 330mmSale price $407.98 Regular price $479.95Unit price
-
Nigara Blue 2 Honyaki Mt Fuji Hamon Sakimaru 300mmSale price $3,272.98 Regular price $3,850.00Unit price










