Sharpen a double-bevel Japanese knife, such as a gyuto or santoku, at about 15 degrees per side. We treat 12 to 15 degrees per side as the sweet spot, and holding one angle steadily matters more than the exact number.
Adjust from there to suit the knife and how you cook. A hard steel on a soft board can go a touch lower. A softer steel, a plastic board or a heavy hand does better at 15 to 18 degrees, so the edge lasts. If the edge chips or rolls, raise the angle a couple of degrees; if it feels thick in the cut, lower it slightly.
On a new knife, copy the angle the maker ground. Colour the edge bevel with a permanent marker and take a few strokes: when the ink clears evenly along the whole edge, you have found it. Two coins stacked on the stone under the spine give a rough starting height. Our whetstone walkthrough covers the stroke itself.
Single-bevel knives are a different job. On a sashimi knife (yanagiba), a fish-butchering knife (deba) or a professional vegetable knife (usuba) you do not pick an angle. You work the front face on the bevel the maker ground, usually around 10 to 15 degrees, then lay the back flat on the stone only to clear the burr. Our sharpening service also sharpens single-bevel knives by hand on whetstones.