PRAHRAN STORE NOW OPEN · THU–MON · 10AM–6PM

What is a burr when sharpening a knife, and how do I remove it?

A burr is the thin wire of steel that sharpening pushes over to the far side of a knife's edge. It tells you that side is done, and a few light trailing strokes on the stone take it off before you move to the next stone or call the knife finished.

It forms once you have removed enough steel on one side to reach the other bevel, and it is the only honest signal that the side is finished. Feel for it with a fingertip moved gently across the edge, from spine to edge and never along it. When you can feel a small catch along the whole length of the blade, flip the knife and repeat.

Once both sides have raised a burr, remove it before you change stones, or it spoils the result.

  • Lighten the pressure for the last few strokes on each side; they then work like a strop.
  • Follow with a few very light strokes on alternate sides, edge trailing, away from the stone and never into it.
  • A carbon steel such as White or Blue gives up its burr easily. A stainless steel such as VG-10 or Ginsan clings to it and usually needs a pass along a folded paper towel, a piece of cardboard or a leather strop.

A knife that feels sharp on the stone and then fails on a tomato usually has a burr still hanging on.

Written by Knives & Stones

Details may change without notice. If you spot an error, tell us and we'll fix it.