By Masutani

Masutani Kokuryu VG10 Tsuchime Damascus

Sanmai - Stainless Damascus Clad Tsuchime VG10 / Stainless Stainless Clad Echizen, Japan

At a modest price for every model in the range, the Kokuryu (刻流, Engraved Flow) line from Masutani is one of those knives that's genuinely hard to argue with. Hand sharpened in Echizen with a VG10 core, it delivers a cutting smoothness that most knives at this price simply can't match — and that gap becomes obvious the first time you run it through something dense.

The geometry is the real story here. The concave grind comes down from the Shinogi line to a very low thickness behind the edge, a level of refinement that you'd typically only find on significantly more expensive knives. This kind of sharpening is achieved on an Ento — a round grinding stone — and requires a level of skill that most budget production lines don't invest in. The result is a blade that enters food cleanly and releases it well, without the resistance and drag that plagues many knives in this price bracket. It's a geometry that also holds up well over repeated sharpenings, which means the performance you get out of the box isn't a one-time experience.

The cladding is a stainless Damascus with a light Tsuchime pattern over it — subtle rather than showy, which suits the knife's character. The focus here is clearly on what the knife does rather than how it looks, though the Damascus texture gives it enough visual interest to feel like a proper Japanese knife rather than a generic budget option. VG10 keeps maintenance simple and the edge retention honest, which makes this a particularly sensible first Japanese knife for anyone not ready to commit to carbon steel.

The one genuine limitation worth knowing is that Masutani doesn't produce this line beyond 185mm — a deliberate decision by the family business rather than an oversight. For home cooks and students who don't need the reach of a 210mm or 240mm, that's a non-issue. The spine and choil can feel a little sharp out of the box, which is easy enough to address with some sandpaper. For first-timers, gift buyers and anyone looking for an honest, high-performing entry point into Japanese kitchen knives, the Kokuryu is a very easy recommendation.

Pros

  • Budget friendly
  • Thin behind the edge
  • Excellent performance

Cons

  • A little bit brittle

Best For

  • First-timers
  • Gift buyers
  • Students
Construction
Sanmai - Stainless Damascus Clad
Surface Finish
Tsuchime
Cladding
Stainless Clad
Steel
VG10 / Stainless
Origin
Echizen, Japan

Frequently asked questions

Does VG10 rust?

Yes, it can. Takefu, which makes VG10 (V金10), lists it among its stainless steels, and the JSSA notes that stainless strictly means rust-resistant, not rust-proof.

Takefu lists VG10's chromium content as 15% and describes its corrosion resistance as excellent. We recommend drying the knife after washing.

Published by K&S Education Desk; staff review pending

What is the difference between VG10 and SG2?

Both are Takefu blade steels, and they differ in class and in what Takefu publishes about each. Takefu lists VG10 as a stainless steel with 1.00% carbon, 15.00% chromium, 1.00% molybdenum, 0.25% vanadium and 1.55% cobalt, at a hardening hardness of HRC 60 or more.

Takefu describes SG2, its Super Gold 2, as a blade steel created by powder metallurgy, lists its composition as not disclosed, and SG2 runs 61 to 65 HRC depending on the maker. Takefu also calls SG2 a powdered stainless high-speed steel.

Published by K&S Education Desk; staff review pending

Shop Masutani Kokuryu VG10 Tsuchime Damascus

View all in collection