PRAHRAN STORE NOW OPEN · THU–MON · 10AM–6PM

BUYING GUIDE

Why Japanese Knives Cost More: What the Money Actually Buys

A $60 chef's knife and a $300 Japanese gyuto do the same job on paper. The price gap is five things you can name: the steel, the heat treatment, the construction, the grind, and the hands that did the work. The making is most of it, and a maker's name can add to the rest. None of it is magic. Here is what each part costs to make, with regular prices from our own range, and the cases where the $60 knife is the honest buy. Prices as at November 2026.

1What the first sixty dollars buys

A department store chef's knife is built soft. One heavily discounted set we have written about was advertised at Rockwell 53, and the soft German style stainlesses sit around 55 to 58 on the same scale. It is thick behind the edge, because thinning a blade takes skilled grinding time and wastes steel, so a production line drops that step first. It is sharpened in large batches, and its steel is chosen to survive a knife block and a dishwasher rather than to take a keen edge.

None of that is a scam. It is a sensible build for a knife that will never meet a whetstone. The part worth knowing is what the hardness number means. The Rockwell C scale is not linear, so each point near the top counts for more than a point near the bottom, and 63 is a long way past 53. A mainstream good Japanese knife runs about 60 and above, and that is a big part of why it takes a keener angle and holds it for months instead of weeks. Hardness is not bought with steel alone.

2The steel, named

Four names cover a big part of our range: VG10, SG2, Blue 2 and White 2. They are real categories, not marketing tiers.

VG10 is the stainless workhorse: about 1 per cent carbon, 15 per cent chromium and a dose of cobalt, typically run at 59 to 61 HRC. It holds a very good edge, it is stainless, and it is the sensible default.

SG2 is a powdered steel from Takefu. Powder metallurgy spreads the hard carbides tiny and even through the steel, which is what lets it run at 61 to 65 HRC, listed at about 62 to 64 in our own Arare SG2, without turning chippy.

Blue 2 and White 2 are the traditional pair. Both are Yasugi "paper steels", made by Proterial, formerly Hitachi Metals, in Yasugi City, Shimane, and the names come from the colour of the paper the billets are wrapped in. They are held to very low impurity limits, which lets the grain form fine and even, and fine grain is what takes a screaming edge. Blue 2 is White 2 plus about 1.25 per cent tungsten and a little chromium, nothing else: the tungsten carbides hold the edge longer, while White 2 takes the finer edge and comes back faster on a stone.

Here is the catch that levels the field. Two knives in the same steel can behave completely differently, because the result depends on the heat treatment more than on the name. Our steel guide carries the specs the makers publish, and the carbon pair is compared properly on our White vs Blue page.

3Heat treatment: where the hardness is actually made

Hardness is set by the smith's heat treatment, inside the limits of the steel. White steel has a narrow, unforgiving hardening window, so the result leans on skill; Blue's additives widen the window, which is one reason production makers favour it. Satoshi Nakagawa, a Sakai blacksmith certified a Traditional Craftsman in 2023, the youngest in the history of Sakai uchihamono according to the trade press, forge-welds at about 1,200 degrees Celsius and reads the fire by eye and skin, not by thermometer, and the same judgement carries through to his quench. Sixteen years under one master sits behind that judgement, and it is invisible on a spec sheet. You are paying for it.

4Construction: stamped, san-mai and honyaki

A cheap blade is cut or stamped from sheet and hardened through, which is fast and cheap. The Japanese step up is san-mai: a hard core forge-welded between layers of softer steel. That sandwich is a toughness decision, letting a thin hard edge survive kitchen life, and it uses less of the costly core steel. On a clad knife, the damascus patterns you see live in those soft outer layers. They are decoration, and fine to want, but they do not cut anything.

The top of the ladder is honyaki: one piece of hard steel, painted with clay, quenched once so the edge hardens fully while the body stays tougher, leaving the hamon line like a sword. This is where the price curve bends, for plain arithmetic reasons. Master Togashi told me water-quenched honyaki fails in the quench about 40 to 50 per cent of the time. Each blade is heat treated on its own, one at a time, where clad knives go through in batches. Blades fail even during sharpening: I have held a finished, mirror-polished 450 mm honyaki yanagiba, by a Sakai master no longer with us, that cracked from the middle and became a total reject after every hour of work in it was spent. The maker absorbs those losses, so the survivors carry them. That is why a real honyaki costs close to three times a clad knife in the same steel, and why only a handful of makers in Japan still make them; we list honyaki from about nine of them. Our honyaki article and the honyaki vs monosteel page take that story to the end.

5The grind and the hand work

The biggest single contributor to how a Japanese knife feels is the one you cannot photograph: steel thinned away behind the cutting edge. It is why a good knife falls through an onion instead of wedging it. It is slow, skilled grinding, it wastes steel, and it is the first cost a cheap knife avoids. After grinding comes sharpening on stones by hand, then the fittings. The Yoshikane wears an ebony handle, the Arare black chacate, and the Kaijin dyed and stabilised curly maple with a stainless ferrule; honyaki knives often add mirror polishing and a fitted saya. On a hand-made knife, every one of those steps is a person.

6Who makes them, and what a name costs

These are not all one kind of place. Nakagawa Hamono's knives come out of Nakagawa Uchihamono, one smith's workshop in Sakai. Kenji Togashi, certified in Sakai's blacksmith division in 1996, forges honyaki we list under Sakai Takayuki, which is the house brand of Aoki Hamono, a larger Sakai maker with a roster of smiths. Mazaki, Anryu and Myojin Riki, maker of the Tetsujin line, are others we list.

7One shape, a spread of prices

The clearest way to see where the money goes is one shape, our gyuto listings, at their regular prices. The gyutos we have in stock run from about $155 to well over $10,000 at the exotic end. The steps between look like this:

- Tojiro VG10 Kurouchi Tsuchime Gyuto 240 mm, about $190: the stainless workhorse floor.

- Hatsukokoro Kaijin Blue 2 Gyuto 210 mm, about $198: a Blue 2 carbon core in stainless cladding, thin laser-style grind, for roughly the same money as the VG10. Steel tier is not the price driver.

- K&S Arare SG2 Gyuto 210 mm by Iron Clad, about $300: the powdered steel premium, listed at about 62 to 64 HRC.

- Yoshikane White 2 Kurouchi Nashiji K-tip Gyuto 210 mm, about $560: hand-forged White 2 in stainless cladding, kurouchi and nashiji finish, from a named smithy.

- Honyaki gyuto: most run about $1,200 to $3,500, with exotic pieces well beyond that. The differential quench, the failure rate and the one-at-a-time heat treatment, priced in.

Read the ladder from either end. From the bottom, the first $200 buys real cutting performance: proper heat treatment and a thin grind. Our first knife guide puts the useful band at roughly $150 to $300, and warns that under about $100 you are usually buying Japanese styling rather than Japanese construction. From the top, everything past about $500 buys craft, rarity, finish and the maker's name. Those are real things, and people who want them are not wrong, but they do not make the knife cut better, and we say so on the gyuto under $300 page as well.

8When the cheaper knife is the right call

Buy the $60 knife when the knife will live hard. A share house, a boat, a holiday shack, a dishwasher household, or a gift for someone who will never sharpen: a soft, thick, forgiving blade is the correct tool for that life, and a thin hard Japanese edge in the same kitchen would just chip.

Two honest warnings from the same pages. First, the false economy is the $50 "Japanese-style" knife: soft steel wearing the look, teaching you the wrong lesson. Second, an expensive knife you are frightened of is a poor tool. People baby a $600 knife, use it less and learn less. A maintained $60 knife can outcut a neglected $300 one, so if the maintenance is not going to happen, buy the knife that matches the reality, or spend the difference on a stone.

9Questions people actually ask

Are Japanese knives worth the money?

That depends what you are buying and whether you will maintain it. Under $100 you get styling more than construction. Between roughly $150 and $300 you buy the two things that change cutting: proper heat treatment and steel thinned behind the edge. Above roughly $500 you buy craft, rarity, finish and the maker's name, which matter to the owner rather than to the onion. If nobody in the house will sharpen, the cheap knife is the rational one.

Why do honyaki knives cost so much?

Arithmetic. Water-quenched honyaki fails 40 to 50 per cent of the time in the quench, each blade is heat treated one at a time, sharpening is slower and blades sometimes fail even then, and only a handful of makers in Japan still make them, which is why a special order can take 12 to 18 months. A real honyaki runs close to three times a clad knife in the same steel, and every one of those reasons is on the invoice.

Does a harder knife cut better?

It cuts keener and stays sharp longer, because a harder edge supports a more acute angle. It is also less tough: it chips where a soft knife rolls, so it wants a wooden or soft plastic board and no bones, frozen food or levering. For someone new to Japanese knives, about 58 to 62 HRC is the balanced band; 63 and above rewards a disciplined hand.

Which steel should I pay for?

Start with VG10 or Ginsan and spend what is left on a stone and a board. SG2 buys longer stretches between sharpenings through powder metallurgy. Blue 2 and White 2 buy the sharpening experience carbon fans chase, at the cost of wiping the blade dry. The steel name matters less than how well it was heat treated and how thin the blade is ground, so judge knives, not steel labels.

If you would rather feel the ladder than read it, our showrooms in Sydney, Melbourne and Canberra can put a workhorse gyuto and, on a good day, a honyaki in your hand, one after the other.