Nigara SG2 Matt Migaki Tsuchime Petty 120mm
Nigara SG2 Matt Migaki Tsuchime Petty 120mm is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
In Stock Now
-
Nigara SG2 Tsuchime Matt Migaki K-tip Gyuto 210mm EbonySale price $356.98 Regular price $419.95Unit price
-
Nigara SG2 Tsuchime Matt Migaki K-tip Petty 150mm Western IronwoodSale price $509.98 Regular price $599.95Unit price
-
Nigara SG2 Tsuchime Matt Migaki Santoku 180mm Western IronwoodSale price $543.98 Regular price $639.95Unit price
-
Nigara SG2 Tsuchime Matt Migaki K-tip Nakiri 180mm Western IronwoodSale price $509.98 Regular price $599.95Unit price
-
Nigara Anmon (暗紋) SG2 Raindrop Damascus K-tip Sujihiki 240mm Mother-of-pearl WesternSale price $764.98 Regular price $899.95Unit price
-
Nigara SG2 Tsuchime K-tip Nakiri 165mm Kurouchi Turquoise HandleSale price $535.98 Regular price $629.95Unit price
-
Nigara SG2 Kurouchi Tsuchime Sujihiki 300mm Western Ironwood w SayaSale price $713.95 Regular price $839.95Unit price
-
Nigara SG2 Kurouchi Tsuchime Gyuto 210mm Western IronwoodSale price $543.98 Regular price $639.95Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Goes well with
Detailed Specifications
| Line | Nigara SG2 Matt Migaki Tsuchime |
| Profile | Petty / Utility knife |
| Bevel Type | Double Bevel |
| Weight | 65 g | 2.3 oz |
| Edge Length | 110 mm | 4 21/64″ |
| Heel Height | 31 mm | 1 7/32″ |
| Width @ Heel | 1.6 mm | 1/16″ |
| Width @ Mid | 1.6 mm | 1/16″ |
| Width @ 1cm from Tip | 0.9 mm | 1/32″ |
| Steel | SG2 / R2 | Powdered | Stainless |
| Blade Construction | Sanmai - Stainless Clad |
| Typical working hardness | 61 to 65 HRC |
| Handle | Octagonal Teak Black Ferrule |
| Region | Aomori |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

Petty
ペティ
Utility knife · Double bevel
Small, slim double-bevel utility knife for peeling, trimming and small board jobs.
Read more-
Hardness
Good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical working hardness: 61 to 65 HRC
-
Edge retention
Very good
How long the edge stays sharp in kitchen use before it needs sharpening. Lab figure: 522 mm of test card cut at 61.2 HRC (SG2, Knife Steel Nerds CATRA test, 2020). Hardness used: 63 HRC, the usual hardness makers sell it at.
-
Toughness
Fair
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
High
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Fair
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
High
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
SG2 / R2
スーパーゴールド2
Stainless · Takefu Special Steel
Takefu powder stainless, 61 to 65 HRC. Long edge; resists rust.
Read moreSanmai - Stainless Clad
三枚
3 layers · stainless clad
Hard core between two stainless layers, bare only at the edge; the cladding resists rust.
Read more
Octagonal Teak Black Ferrule
Octagonal WA
Golden-brown teak, eight-sided, with a black buffalo horn ferrule. Teak resists moisture.




