Tojiro MV Stainless Yanagiba 210mm F-1056
Tojiro MV Stainless Yanagiba 210mm F-1056 is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
In Stock Now
-
Tojiro DP3 Yo-Deba 240mm F-815Sale price $246.98 Regular price $289.95Unit price
-
Tojiro SG2 Powdered Steel Gyuto 240 mm F-521Sale price $288.98 Regular price $339.00Unit price
-
Tojiro SG2 Powdered Steel Santoku 170 mm F-517Sale price $230.00 Regular price $289.95Unit price
-
Masamoto Sohonten VG Cobalt (VG Series) Yanagiba 330 mmSale price $1,274.98 Regular price $1,499.95Unit price
-
Masamoto Sohonten VG Cobalt (VG Series) Yanagiba 300 mmSale price $1,019.98 Regular price $1,199.95Unit price
-
Masamoto Sohonten VG Series Sujihiki 240 mmSale price $318.98 Regular price $374.95Unit price
-
Masamoto Sohonten VG Series Petty 150 mm (VG6315)Sale price $212.98 Regular price $249.95Unit price
-
Sakai Takayuki GinRyu (銀龍) Swedish Steel Honyaki Yanagiba 300mm, Marble Horn Ebony HandleSale price $1,019.98 Regular price $1,199.95Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Goes well with
Detailed Specifications
| Line | Tojiro MV Single bevel |
| Profile | Yanagiba / Sashimi knife |
| Bevel Type | Single Bevel |
| Weight | 84 g | 3.0 oz |
| Edge Length | 204 mm | 8 1/32″ |
| Heel Height | 30 mm | 1 3/16″ |
| Width @ Heel | 1.9 mm | 5/64″ |
| Width @ Mid | 1.8 mm | 5/64″ |
| Width @ 1cm from Tip | 1.3 mm | 3/64″ |
| Steel | MV (Molybdenum Vanadium) | Stainless |
| Blade Construction | Nimai - Stainless Clad |
| Typical hardness | 54 to 60 HRC |
| Surface Finish | Kasumi |
| Handle | D Shaped Ho Wood Black Ferrule |
| Region | Tsubame |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

Yanagiba
柳刃
Sashimi knife · Single bevel
Long single-bevel sashimi slicer with a pointed tip. One clean draw cuts raw fish.
Read more-
Hardness
Low
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 54 to 60 HRC
-
Edge retention
Low
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from 420 (319 mm of test card cut at 55 HRC, Knife Steel Nerds CATRA test, 2022). Hardness used: 57.5 HRC, the usual hardness makers sell it at.
-
Toughness
Fair
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
High
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Good
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
MV (Molybdenum Vanadium)
モリブデンバナジウム鋼
Stainless
We list MV steel knives from Masamoto Sohonten, Tojiro, KAI and Sakai Takayuki.
Read moreNimai - Stainless Clad
二枚・ステンレス
2 layers · single bevel
Two layers, single bevel: hard steel on the back, stainless cladding over the other.
Read more
Kasumi
Misty polish
Hazy, matte bevel where soft iron meets hard core steel. The iron patinas and rusts.
Read more
D Shaped Ho Wood Black Ferrule
D Shape WA
Pale ho wood, D-section wa, with a black buffalo horn ferrule. The D is handed; check fit.






