Hatsukokoro FAXR2 Damascus Gyuto 270mm
Hatsukokoro FAXR2 Damascus Gyuto 270mm is backordered and will ship as soon as it is back in stock.
Pickup in Australia only
In Stock Now
-
Hatsukokoro Hayabusa ATS34 Sanmai Petty 150mmSale price $126.00 Regular price $148.00Unit price
-
Hatsukokoro Blue 2 Damascus Migaki Santoku 180mm Ebony HandleSale price $157.00 Regular price $185.00Unit price
-
Hatsukokoro Sumi Blue 2 Kurouchi Santoku 165mm Black Chacate HandleSale price $84.00 Regular price $99.00Unit price
-
Takeshi Saji SG2 Diamond Damascus Gyuto 240mm Ebony HandleSale price $444.00 Regular price $522.00Unit price
-
Takeshi Saji SG2 Diamond Damascus Gyuto 270mm Ebony Handle Horn FerruleSale price $491.00 Regular price $578.00Unit price
-
Tojiro VG10 Supreme 37 Layered Flowing Mist Gyuto 260mm FD-915Sale price $104.00 Regular price $148.00Unit price
-
Tojiro VG10 Supreme 63 Layered Nickel Damascus Gyuto 260mm FD-905Sale price $117.00 Regular price $166.00Unit price
-
Hatsukokoro Ginsan Kurouchi Damascus Gyuto 240mm Carbon Fibre HandleSale price $470.00 Regular price $553.00Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Hatsukokoro FAXR2 Damascus |
| Profile | Gyuto / Chef's knife |
| Bevel Type | Double Bevel |
| Weight | 243 g | 8.6 oz |
| Edge Length | 257 mm | 10 1/8″ |
| Heel Height | 53 mm | 2 3/32″ |
| Width @ Heel | 2.9 mm | 7/64″ |
| Width @ Mid | 2.7 mm | 7/64″ |
| Width @ 1cm from Tip | 0.9 mm | 1/32″ |
| Steel | FAXR2 | Powdered | Stainless |
| Blade Construction | Sanmai - Stainless Damascus Clad |
| Typical hardness | 62 to 63 HRC |
| Surface Finish | Mirror Polish |
| Handle | Octagonal Birch Burl with Spacer |
| Region | Hyogo |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

Gyuto
牛刀
Chef's knife · Double bevel
Double-bevel all-purpose chef's knife with a pointed tip; thinner than a Western one.
Read more-
Hardness
Very good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 62 to 63 HRC
-
Edge retention
Very good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from CPM-154 (492 mm of test card cut at 61 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 62.5 HRC, as listed by us.
-
Toughness
Very good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
High
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Fair
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
High
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
FAXR2
Stainless
We list Hatsukokoro FAXR2 gyuto, santoku, sujihiki and yanagiba.
Read moreSanmai - Stainless Damascus Clad
三枚ダマスカス
3 layers · damascus clad
Hard core between stainless damascus layers, bare at the edge. Thinning wears the pattern.
Read more
Mirror Polish
Mirror polish
Polished to a true mirror that shows hamon or damascus clearly. Every scratch shows.
Read more
Octagonal Birch Burl with Spacer
Octagonal WA
Stabilised birch burl, eight-sided, with a spacer. Resin-stabilised wood resists water.








