Hatsukokoro Hayabusa ATS34 Sanmai Bunka 180mm
Hatsukokoro Hayabusa ATS34 Sanmai Bunka 180mm is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
In Stock Now
-
Hatsukokoro Hayabusa ATS34 Sanmai Petty 150mmSale price $203.98 Regular price $239.95Unit price
-
Hatsukokoro Blue 2 Damascus Migaki Santoku 180mm Ebony HandleSale price $254.98 Regular price $299.95Unit price
-
Hatsukokoro Sumi Blue 2 Kurouchi Santoku 165mm Black Chacate HandleSale price $135.98 Regular price $159.95Unit price
-
Hatsukokoro Shikkoku Blue 2 Kurouchi Santoku 165mm Ebony HandleSale price $151.98 Regular price $178.00Unit price
-
Hatsukokoro Ryuhyo SG2 Damascus Petty 150mm Olivewood HandleSale price $212.98 Regular price $249.95Unit price
-
Hatsukokoro Ryuhyo SG2 Damascus Santoku 180mm Olivewood HandleSale price $249.98 Regular price $294.00Unit price
-
Hatsukokoro Ryuhyo SG2 Damascus Bunka 180mm Olivewood HandleSale price $263.98 Regular price $309.95Unit price
-
Hatsukokoro Ryuhyo SG2 Damascus K tip Gyuto 240mm Olivewood HandleSale price $283.98 Regular price $334.00Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Goes well with
Detailed Specifications
| Line | Hatsukokoro Hayabusa ATS34 Sanmai |
| Profile | Bunka / K-tip santoku |
| Bevel Type | Double Bevel |
| Weight | 144 g | 5.1 oz |
| Edge Length | 170 mm | 6 11/16″ |
| Heel Height | 46 mm | 1 13/16″ |
| Width @ Heel | 2.4 mm | 3/32″ |
| Width @ Mid | 2.0 mm | 5/64″ |
| Width @ 1cm from Tip | 0.7 mm | 1/32″ |
| Steel | ATS34 | Stainless |
| Blade Construction | Sanmai - Stainless Clad |
| Typical hardness | 60 to 61 HRC |
| Surface Finish | Migaki |
| Handle | Octagonal Ebony |
| Region | Hyogo |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

Bunka
文化
K-tip santoku · Double bevel
A compact all-rounder like a santoku; a Sakai maker says its angled K-tip suits fine work.
Read more-
Hardness
Good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 60 to 61 HRC
-
Edge retention
Very good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from CPM-154 (492 mm of test card cut at 61 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 60.5 HRC, as listed by us.
-
Toughness
Good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Good
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Good
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Fair
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
ATS34
ATS-34
Stainless · Hitachi Metals (now Proterial)
Proterial stainless, 14% chromium, 4% molybdenum, hardening hardness over 59 HRC. Stainless rusts less; dry it after washing.
Read moreSanmai - Stainless Clad
三枚
3 layers · stainless clad
Hard core between two stainless layers, bare only at the edge; the cladding resists rust.
Read more
Migaki
Polished satin
Smooth polished surface, satin to soft sheen rather than mirror. Scratches show.
Read more
Octagonal Ebony
Octagonal WA
Dense, dark ebony in the eight-sided wa shape. The flats give a sure grip for either hand.






