Excellent fit and finish · Razor sharp out of the box The knife exceeded my expectations. The edge is razor sharp out of the box, which is expected. It is much sharper than most knives this size. I checked the bevel with a laser and found it was sharpened at 13 degrees per side. That's a fairly small angle for a knife this size, but explains the sharpness. The balance very good. It's a slight bit heavier but I was looking for something more on the heavy end for use a daily driver so this fits the bill nicely.
Hatsukokoro Kurokaze Blackwind White 2 Gyuto 210mm Stainless Clad
Hatsukokoro Kurokaze Blackwind White 2 Gyuto 210mm Stainless Clad is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Hatsukokoro Kurokaze White 2 Kurouchi |
| Profile | Gyuto / Chef's knife |
| Bevel Type | Double Bevel |
| Weight | 204 g | 7.2 oz |
| Edge Length | 215 mm | 8 15/32″ |
| Heel Height | 47 mm | 1 27/32″ |
| Width @ Heel | 4.0 mm | 5/32″ |
| Width @ Mid | 2.9 mm | 7/64″ |
| Width @ 1cm from Tip | 1.1 mm | 3/64″ |
| Steel | White 2 / Shirogami #2 | Carbon |
| Blade Construction | Sanmai - Stainless Clad |
| Typical hardness | 60 to 64 HRC |
| Surface Finish | Kurouchi |
| Handle | Octagonal Black Chacate |
| Region | Hyogo |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
- Oil the (carbon) knife if storing for an extended period of time to prevent rust.
Customer reviews
Knife details

Gyuto
牛刀
Chef's knife · Double bevel
Double-bevel all-purpose chef's knife with a pointed tip; thinner than a Western one.
Read more-
Hardness
Very good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 60 to 64 HRC
-
Edge retention
Good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from 1095 (316 mm of test card cut at 61.8 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 61.5 HRC, the usual hardness makers sell it at. Carbon steels score lower on this abrasive test, which is why our grade also counts hardness.
-
Toughness
Good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Low
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Very high
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
White 2 / Shirogami #2
白二鋼
Carbon · Hitachi Metals (now Proterial)
Proterial carbon steel, 1.05 to 1.15% carbon, no chromium or tungsten; not stainless.
Read moreSanmai - Stainless Clad
三枚
3 layers · stainless clad
Hard core between two stainless layers, bare only at the edge; the cladding resists rust.
Read more
Kurouchi
Black forge scale
Dark forge scale left on the upper blade. The bevel and edge still need care.
Read more
Octagonal Black Chacate
Octagonal WA
Black chacate, a dense dark African wood near ebony, eight-sided; may show pale sapwood.
Frequently asked questions
Gyuto or santoku: which should I choose?
What is a gyuto knife used for?
What gyuto length should I choose?
240mm vs 210mm gyuto: which size should I choose?
Japanese or German kitchen knives: which should I buy?
What is the flat spot on a knife, and is it the same as the "sweet spot"?
Gyuto or chef's knife: what is the difference?
Is a Japanese knife set worth buying, or should I buy knives one at a time?
You May Also Like
-
Hatsukokoro Kurokaze White 2 Kurouchi Petty 150mm Stainless CladSale price $136.00 Regular price $160.00Unit price
-
Hatsukokoro Kurokaze White 2 Kurouchi Gyuto 180mm Stainless Clad Black ChacateSale price $147.00 Regular price $172.00Unit price
-
Hatsukokoro Hayabusa ATS34 Sanmai Petty 150mmSale price $126.00 Regular price $148.00Unit price
-
Hatsukokoro Blue 2 Damascus Migaki Santoku 180mm Ebony HandleSale price $157.00 Regular price $185.00Unit price
-
Hatsukokoro Sumi Blue 2 Kurouchi Santoku 165mm Black Chacate HandleSale price $84.00 Regular price $99.00Unit price
-
Hatsukokoro x Myojin Shirasagi White 2 Left Handed Deba 150mmSale price $209.00 Regular price $246.00Unit price
-
Exotic: Genkai Masakuni (玄海正國) White 2 Honyaki Usuba 240mm Ebony Set, Full Mirror Finish with Wavy HamonSale price $2,349.00 Regular price $2,763.00Unit price
-
Hatsukokoro x Myojin Shirasagi White 2 Kamagata Usuba 180mmSale price $167.00 Regular price $197.00Unit price







