Hatsukokoro x Satoshi Nakagawa Blue 1 Etched Black Damascus Gyuto 210mm
Hatsukokoro x Satoshi Nakagawa Blue 1 Etched Black Damascus Gyuto 210mm is backordered and will ship as soon as it is back in stock.
Pickup in Australia only
In Stock Now
-
Nakagawa Ginsan Yanagiba 270 / 300 / 330 mm Mirror Polished Finish, Left-HandedSale priceFrom $392.00 Regular price $460.00Unit price
-
Naoto Blue 1 Damascus Kurouchi Bunka 180mmSale price $183.00 Regular price $215.00Unit price
-
Naoto Blue 1 Damascus Kurouchi Santoku 180mmSale price $183.00 Regular price $215.00Unit price
-
Hatsukokoro Blue 1 Kasumi Gyuto 210mmSale price $182.00 Regular price $228.00Unit price
-
Exotic: Yoshikazu Ikeda Blue #1 Mizu-Honyaki Yanagiba 300mm / Moribashi Set #1Sale price $2,349.00 Regular price $2,763.00Unit price
-
Takeshi Saji SG2 Diamond Damascus Gyuto 240mm Ebony HandleSale price $444.00 Regular price $522.00Unit price
-
Takeshi Saji SG2 Diamond Damascus Gyuto 270mm Ebony Handle Horn FerruleSale price $491.00 Regular price $578.00Unit price
-
Tojiro VG10 Supreme 37 Layered Flowing Mist Gyuto 260mm FD-915Sale price $104.00 Regular price $148.00Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Nakagawa Blue 1 Damascus Etched black Wide Bevel |
| Profile | Gyuto / Chef's knife |
| Bevel Type | Double Bevel |
| Weight | 138 g | 4.9 oz |
| Edge Length | 200 mm | 7 7/8″ |
| Heel Height | 48 mm | 1 57/64″ |
| Width @ Heel | 2.8 mm | 7/64″ |
| Width @ Mid | 2.1 mm | 5/64″ |
| Width @ 1cm from Tip | 0.9 mm | 1/32″ |
| Steel | Blue 1 / Aogami #1 | Carbon |
| Blade Construction | Sanmai - Soft Iron Damascus Clad |
| Typical hardness | 61 to 64 HRC |
| Surface Finish | Etched |
| Handle | Octagonal Birch Burl with Spacer |
| Region | Sakai |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
- Oil the (carbon) knife if storing for an extended period of time to prevent rust.
Knife details

Gyuto
牛刀
Chef's knife · Double bevel
Double-bevel all-purpose chef's knife with a pointed tip; thinner than a Western one.
Read more-
Hardness
Very high
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 61 to 64 HRC
-
Edge retention
Very good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from V-Toku2 (314 mm of test card cut at 63.6 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 63 HRC, the usual hardness makers sell it at. Carbon steels score lower on this abrasive test, which is why our grade also counts hardness.
-
Toughness
Very good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Low
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Very high
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
Blue 1 / Aogami #1
青一鋼
Carbon · Hitachi Metals (now Proterial)
Proterial carbon steel, 1.25 to 1.35% carbon with chromium and tungsten; not stainless.
Read moreSanmai - Soft Iron Damascus Clad
三枚・軟鉄ダマスカス
3 layers · iron damascus clad
Hard core between two soft iron damascus layers. The iron patinas and rusts; keep it dry.
Read more
Etched
Acid-etched pattern
Acid darkens the layers at different rates to show the damascus. Heavy thinning fades it.
Read more
Octagonal Birch Burl with Spacer
Octagonal WA
Stabilised birch burl, eight-sided, with a spacer. Resin-stabilised wood resists water.







