Sukenari White 2 K-tip Yanagiba 270mm, Ebony Brass Handle
Sukenari White 2 K-tip Yanagiba 270mm, Ebony Brass Handle is backordered and will ship as soon as it is back in stock.
Pickup in Australia only
In Stock Now
-
Sukenari White 2 K-tip Yanagiba 300mm, Ebony Brass HandleSale price $293.00 Regular price $344.00Unit price
-
Sukenari SG2 Nimai Sakimaru Takobiki 330mm, Ebony Handle Horn FerruleSale price $679.00 Regular price $799.00Unit price
-
Sukenari Blue 2 Deba 210mm, Ebony Spacer HandleSale price $334.00 Regular price $393.00Unit price
-
Sukenari Blue 2 Kanto Usuba 210mm, Ebony Spacer HandleSale price $309.00 Regular price $363.00Unit price
-
Sukenari ZDP-247 Damascus Santoku 180mm, Ebony HandleSale price $444.00 Regular price $522.00Unit price
-
Hatsukokoro x Myojin Shirasagi White 2 Left Handed Deba 150mmSale price $209.00 Regular price $246.00Unit price
-
Exotic: Genkai Masakuni (玄海正國) White 2 Honyaki Usuba 240mm Ebony Set, Full Mirror Finish with Wavy HamonSale price $2,349.00 Regular price $2,763.00Unit price
-
Hatsukokoro x Myojin Shirasagi White 2 Kamagata Usuba 180mmSale price $167.00 Regular price $197.00Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Sukenari White Steel Single Bevel Migaki |
| Profile | K-tip Yanagiba / K-tip sashimi knife |
| Bevel Type | Single Bevel |
| Weight | 234 g | 8.3 oz |
| Edge Length | 265 mm | 10 7/16″ |
| Heel Height | 33 mm | 1 19/64″ |
| Width @ Heel | 3.9 mm | 5/32″ |
| Width @ Mid | 3.1 mm | 1/8″ |
| Width @ 1cm from Tip | 1.4 mm | 1/16″ |
| Steel | White 2 / Shirogami #2 | Carbon |
| Blade Construction | Nimai - Soft Iron Clad |
| Typical hardness | 60 to 64 HRC |
| Surface Finish | Migaki |
| Handle | |
| Region | Toyama |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
- Oil the (carbon) knife if storing for an extended period of time to prevent rust.
Knife details

K-tip Yanagiba
切付柳刃
K-tip sashimi knife · Single bevel
Single-bevel sashimi slicer with an angled tip and flatter front; also does garnish work.
Read more-
Hardness
Very good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 60 to 64 HRC
-
Edge retention
Good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from 1095 (316 mm of test card cut at 61.8 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 61.5 HRC, the usual hardness makers sell it at. Carbon steels score lower on this abrasive test, which is why our grade also counts hardness.
-
Toughness
Good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Low
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Very high
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
White 2 / Shirogami #2
白二鋼
Carbon · Hitachi Metals (now Proterial)
Proterial carbon steel, 1.05 to 1.15% carbon, no chromium or tungsten; not stainless.
Read moreNimai - Soft Iron Clad
二枚・軟鉄
2 layers · single bevel
Two layers, single bevel: hard steel on the back, soft iron elsewhere; it patinas.
Read more
Migaki
Polished satin
Smooth polished surface, satin to soft sheen rather than mirror. Scratches show.
Read more








