Kurosaki VG XEOS Gekko Petty 130mm Ebony Handle

A petty is a small utility knife, from the French petit. It is commonly shaped like a small gyuto and runs from 120 to 150 mm, up to 180 mm. Its clearest role is detailed work where a larger knife feels cumbersome: fruit peeling, garnish work, condiments, and small board work beside a gyuto or santoku.

A knife maker, Tojiro, frames the petty as a useful second knife, not an automatic necessity, and recommends santoku plus petty or gyuto plus petty combinations. It is not a replacement for a full size chef's knife; it lacks the blade length and belly for efficient chopping, rocking, or breaking down larger proteins. Treat it as a precision tool, not an all-rounder.

Petty knife lengths vary by maker: KAI's guide defines a petty (ペティナイフ) as a small knife with a narrow blade measuring 150 mm or under. Its table gives 90 to 150 mm, and it describes the shape as a smaller gyuto with a pointed tip.

We list petty knives from 70 mm to 165 mm, including lengths above the limit used in KAI's guide.

No. Takefu, which developed VG XEOS, says a special melting method gives it a fine microstructure that improves wear resistance, strength and hardenability.

Takefu says X refers to a new material combining corrosion resistance with hardness, while EOS refers to the dawn of a new stage in cutlery.

Takefu lists both VG XEOS and VG10 as stainless blade steels. Takefu lists VG10 at 1.00% carbon, 15.00% chromium, 1.00% molybdenum, 0.25% vanadium and 1.55% cobalt, with a hardening hardness of HRC 60 or more, and lists the composition of VG XEOS as not disclosed.

For VG XEOS, Takefu states it developed a new blade steel that combines high corrosion resistance and high hardness, with a fine microstructure created by a special melting method.

We think so. Yu Kurosaki established his own workshop in 2014 after twelve years at Kanehiro Uchihamono (カネ弘打刃物), and he was certified as a traditional craftsman (伝統工芸士) in 2019. In a 2022 interview with the magazine Nihonmono, he described his knives as thin, sharp and tough.

We list his knives in steels such as SG2 and Blue Super. For a closer look at his work and approach, you can explore the Yu Kurosaki maker page on the Knives and Stones site.

All four are Yu Kurosaki's own designs. In a 2022 interview with the magazine Nihonmono he named his five original designs, Shizuku, Fujin, Raijin, Juhyo and Senko, and described his knives as thin, sharp and tough.

In our range the steel is in the product title: Senko and Fujin are made in SG2 and Raijin in VG10W. So pick the design you like first, then check the steel in its title.

Yes. Yu Kurosaki worked at Kanehiro Uchihamono from 2002 to 2014, then founded his own workshop, 黒﨑打刃物 (Kurosaki Uchihamono), in 2014, and he is certified as a traditional craftsman. The trade body's profile of him lists double-bevel forged knives and custom knives, and his own site says his Echizen forged knives are made one by one by a craftsman's hand.

The Kurosaki knives we stock, such as the Senko SG2, Fujin SG2, Raijin VG10W and Shizuku lines, carry his name in the title.