Hatsukokoro Blue 2 Hakata Style Paring 80mm
Hatsukokoro Blue 2 Hakata Style Paring 80mm is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Goes well with
Detailed Specifications
| Line | Hatsukokoro Kuronami Blue 2 Kurouchi |
| Profile | Petty / Utility knife |
| Bevel Type | Double Bevel |
| Weight | 114 g | 4.0 oz |
| Edge Length | 80 mm | 3 5/32″ |
| Heel Height | 30 mm | 1 3/16″ |
| Width @ Heel | 3.4 mm | 9/64″ |
| Width @ Mid | 3.4 mm | 9/64″ |
| Width @ 1cm from Tip | 2.6 mm | 7/64″ |
| Steel | Blue 2 / Aogami #2 | Carbon |
| Blade Construction | Sanmai - Soft Iron Clad |
| Typical hardness | 61 to 63 HRC |
| Surface Finish | Kurouchi |
| Handle | Octagonal Black Chacate |
| Region | Hyogo |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
- Oil the (carbon) knife if storing for an extended period of time to prevent rust.
Knife details

Petty
ペティ
Utility knife · Double bevel
Small, slim double-bevel utility knife for peeling, trimming and small board jobs.
Read more-
Hardness
Good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 61 to 63 HRC
-
Edge retention
Very good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from V-Toku2 (314 mm of test card cut at 63.6 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 62.5 HRC, the usual hardness makers sell it at. Carbon steels score lower on this abrasive test, which is why our grade also counts hardness.
-
Toughness
Good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Low
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Very high
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
Blue 2 / Aogami #2
青二鋼
Carbon · Hitachi Metals (now Proterial)
Proterial carbon steel, 1.05 to 1.15% carbon with chromium and tungsten; not stainless.
Read moreSanmai - Soft Iron Clad
三枚・軟鉄
3 layers · soft iron clad
Hard core between two soft iron layers, bare at the edge. The iron patinas and rusts.
Read more
Kurouchi
Black forge scale
Dark forge scale left on the upper blade. The bevel and edge still need care.
Read more
Octagonal Black Chacate
Octagonal WA
Black chacate, a dense dark African wood near ebony, eight-sided; may show pale sapwood.
Frequently asked questions
What is a petty knife and when do I need one?
How long is a petty knife?
What is a good second Japanese knife after a gyuto?
Will a carbon steel knife rust, and how do I look after it?
What is the difference between Blue 2 and White 2 steel?
Is Hatsukokoro a maker or a brand, and who makes the knives?
What does the name Hatsukokoro mean?
Which Hatsukokoro line should I pick, carbon or stainless?
You May Also Like
-
Hatsukokoro Kuronami Blue 2 Kurouchi Santoku 165mmSale price $135.98 Regular price $159.95Unit price
-
Hatsukokoro Hayabusa ATS34 Sanmai Petty 150mmSale price $203.98 Regular price $239.95Unit price
-
Hatsukokoro Blue 2 Damascus Migaki Santoku 180mm Ebony HandleSale price $254.98 Regular price $299.95Unit price
-
Hatsukokoro Sumi Blue 2 Kurouchi Santoku 165mm Black Chacate HandleSale price $135.98 Regular price $159.95Unit price
-
Hatsukokoro Shikkoku Blue 2 Kurouchi Santoku 165mm Ebony HandleSale price $151.98 Regular price $178.00Unit price
-
Nigara Blue/White Steel Coreless Etched Black Damascus Sakimaru Takohiki 330mm w/ Triple Spacer Ebony HandleSale price $4,164.98 Regular price $4,899.95Unit price
-
Sakai Takayuki Genbu (玄武) Blue #2 Sakimaru Yanagiba 300mm w/ SayaSale price $934.98 Regular price $1,099.95Unit price
-
Higonokami Aogami Folding Knife - SmallSale price $45.98 Regular price $52.95Unit price





