Nigara Blue 2 Honyaki Dual Hamon Kiritsuke Yanagiba 300mm
Nigara Blue 2 Honyaki Dual Hamon Kiritsuke Yanagiba 300mm is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Nigara Honyaki |
| Profile | K-tip Yanagiba / K-tip sashimi knife |
| Bevel Type | Single Bevel |
| Weight | 308 g | 10.9 oz |
| Edge Length | 287 mm | 11 19/64″ |
| Heel Height | 41 mm | 1 39/64″ |
| Width @ Heel | 5.0 mm | 13/64″ |
| Width @ Mid | 4.0 mm | 5/32″ |
| Width @ 1cm from Tip | 1.2 mm | 3/64″ |
| Steel | Blue 2 / Aogami #2 | Carbon |
| Blade Construction | Honyaki |
| Typical hardness | 61 to 63 HRC |
| Surface Finish | Etched |
| Handle | triple spacer ebony |
| Region | Aomori |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
- Oil the (carbon) knife if storing for an extended period of time to prevent rust.
Knife details

K-tip Yanagiba
切付柳刃
K-tip sashimi knife · Single bevel
Single-bevel sashimi slicer with an angled tip and flatter front; also does garnish work.
Read more-
Hardness
Very good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 61 to 63 HRC
-
Edge retention
Very good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from V-Toku2 (314 mm of test card cut at 63.6 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 62.5 HRC, the usual hardness makers sell it at. Carbon steels score lower on this abrasive test, which is why our grade also counts hardness.
-
Toughness
Very good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Low
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Very high
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
Blue 2 / Aogami #2
青二鋼
Carbon · Hitachi Metals (now Proterial)
Proterial carbon steel, 1.05 to 1.15% carbon with chromium and tungsten; not stainless.
Read moreHonyaki
本焼
One steel · differential hardening
One steel, only the edge hardened, showing a hamon. Mostly carbon (rusts); some stainless.
Read more
Etched
Acid-etched pattern
Acid darkens the layers at different rates to show the damascus. Heavy thinning fades it.
Read more
triple spacer ebony
Octagonal WA
Octagonal ebony with horn fittings and three pale spacer bands, two at the ferrule end.
Frequently asked questions
Will a carbon steel knife rust, and how do I look after it?
What is the difference between Blue 2 and White 2 steel?
How old is Nigara, and did it make swords?
Who leads Nigara today?
Is Nigara a good knife maker?
You May Also Like
-
Nigara Blue 2 Honyaki Mt Fuji Hamon Sakimaru 300mmSale price $2,010.00 Regular price $2,364.00Unit price
-
Nigara Anmon (暗紋) SG2 Raindrop Damascus K-tip Sujihiki 240mm Mother-of-pearl WesternSale price $470.00 Regular price $553.00Unit price
-
Nigara SG2 Tsuchime K-tip Nakiri 165mm Kurouchi Turquoise HandleSale price $330.00 Regular price $387.00Unit price
-
Nigara SG2 Kurouchi Tsuchime Gyuto 210mm Western IronwoodSale price $334.00 Regular price $393.00Unit price
-
Nigara SG2 Kurouchi Tsuchime K-tip Gyuto 210mm Western IronwoodSale price $314.00 Regular price $369.00Unit price
-
Nigara SG2 Kurouchi Tsuchime K-tip Gyuto 240mm Western Ironwood w/ SayaSale price $366.00 Regular price $430.00Unit price
-
Hatsukokoro x Myojin Shirasagi Blue 2 Kurouchi Sakimaru Takohiki 300mmSale price $230.00 Regular price $271.00Unit price
-
Myojin Riki x Hatsukokoro Shirasagi Blue 2 Kurouchi K-Tip Deba 165mmSale price $172.00 Regular price $202.00Unit price












