Nigara SG2 Kurouchi Tsuchime K-tip Gyuto 210mm Western Ironwood
Nigara SG2 Kurouchi Tsuchime K-tip Gyuto 210mm Western Ironwood is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Detailed Specifications
| Line | Nigara SG2 Kurouchi Tsuchime Special Western Handle |
| Profile | K-tip Gyuto / K-tip chef's knife |
| Bevel Type | Double Bevel |
| Weight | 224 g | 7.9 oz |
| Edge Length | 197 mm | 7 3/4″ |
| Heel Height | 49 mm | 1 59/64″ |
| Width @ Heel | 2.2 mm | 3/32″ |
| Width @ Mid | 2.1 mm | 5/64″ |
| Width @ 1cm from Tip | 1.0 mm | 3/64″ |
| Steel | SG2 / R2 | Powdered | Stainless |
| Blade Construction | Sanmai - Stainless Clad |
| Typical working hardness | 61 to 65 HRC |
| Surface Finish | Kurouchi |
| Handle | Coke-bottle Shaped Western |
| Region | Aomori |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

K-tip Gyuto
切付牛刀
K-tip chef's knife · Double bevel
Double-bevel chef's knife with an angled tip and flatter edge for push cuts and scoring.
Read more-
Hardness
Good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical working hardness: 61 to 65 HRC
-
Edge retention
Very good
How long the edge stays sharp in kitchen use before it needs sharpening. Lab figure: 522 mm of test card cut at 61.2 HRC (SG2, Knife Steel Nerds CATRA test, 2020). Hardness used: 63 HRC, the usual hardness makers sell it at.
-
Toughness
Fair
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
High
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Fair
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
High
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
SG2 / R2
スーパーゴールド2
Stainless · Takefu Special Steel
Takefu powder stainless, 61 to 65 HRC. Long edge; resists rust.
Read moreSanmai - Stainless Clad
三枚
3 layers · stainless clad
Hard core between two stainless layers, bare only at the edge; the cladding resists rust.
Read more
Kurouchi
Black forge scale
Dark forge scale left on the upper blade. The bevel and edge still need care.
Read more
Coke-bottle Shaped Western
Coke-bottle shaped western
Western grip: wide middle, tapered ends.
Frequently asked questions
Is a K-tip Gyuto the same as a traditional Kiritsuke?
SG2 steel knives at Knives and Stones
SG2 vs AS steel for kitchen knives: which is better?
R2 steel vs SG2: are they the same?
What is the difference between VG10 and SG2?
What is the difference between SG2 and ZDP-189?
My SG2 knife doesn't stay sharp. What's wrong?
You May Also Like
-
Nigara SG2 Tsuchime K-tip Nakiri 165mm Kurouchi Turquoise HandleSale price $332.00 Regular price $390.00Unit price
-
Nigara SG2 Kurouchi Tsuchime Gyuto 210mm Western IronwoodSale price $337.00 Regular price $396.00Unit price
-
Nigara SG2 Kurouchi Tsuchime K-tip Gyuto 240mm Western Ironwood w/ SayaSale price $368.00 Regular price $433.00Unit price
-
Nigara Anmon (暗紋) SG2 Raindrop Damascus K-tip Sujihiki 240mm Mother-of-pearl WesternSale price $473.00 Regular price $557.00Unit price
-
Nigara Anmon SG2 Raindrop Damascus Santoku 170mm Birch (暗紋)Sale price $311.00 Regular price $365.00Unit price
-
Takeshi Saji SG2 Diamond Damascus Gyuto 240mm Ebony HandleSale price $447.00 Regular price $526.00Unit price
-
Takeshi Saji SG2 Diamond Damascus Gyuto 270mm Ebony Handle Horn FerruleSale price $494.00 Regular price $581.00Unit price
-
K&S Arare SG2 Petty 135mm by Iron Clad, with Black Charcate HandleSale price $137.00 Regular price $161.00Unit price









