Shibata Koutetsu Chromax K-tip Petty 135mm
Shibata Koutetsu Chromax K-tip Petty 135mm is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
In Stock Now
-
K&S Arare SG2 Petty 135mm by Iron Clad, with Black Charcate HandleSale price $220.98 Regular price $259.95Unit price
-
K&S Arare SG2 Nakiri 165mm by Iron Clad, Black Charcate HandleSale price $237.98 Regular price $279.95Unit price
-
K&S Arare SG2 Gyuto 210mm by Iron Clad, with Black Charcate HandleSale price $254.98 Regular price $299.95Unit price
-
K&S Arare SG2 Bunka 170mm by Iron Clad, with Black Charcate HandleSale price $237.98 Regular price $279.95Unit price
-
K&S Arare SG2 Santoku 170mm by Iron Clad, with Black Charcate HandleSale price $237.98 Regular price $279.95Unit price
-
Hatsukokoro Hayabusa Chromax Gyuto 240mm, Ebony HandleSale price $195.98 Regular price $229.95Unit price
-
Hatsukokoro Hayabusa Chromax Nakiri 165mm, Ebony HandleSale price $169.98 Regular price $199.95Unit price
-
Hatsukokoro Hayabusa Chromax Sujihiki 240mm, Ebony HandleSale price $195.98 Regular price $229.95Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Goes well with
Detailed Specifications
| Line | Shibata Koutetsu Chromax |
| Profile | K-tip Petty / K-tip utility knife |
| Bevel Type | Double Bevel |
| Weight | 62 g | 2.2 oz |
| Edge Length | 133 mm | 5 15/64″ |
| Heel Height | 30 mm | 1 3/16″ |
| Width @ Heel | 2.0 mm | 5/64″ |
| Width @ Mid | 1.9 mm | 5/64″ |
| Width @ 1cm from Tip | 1.0 mm | 3/64″ |
| Steel | Chromax | Semi-stainless |
| Blade Construction | Sanmai - Stainless Clad |
| Maker's hardening hardness | 61 HRC or more |
| Surface Finish | Migaki |
| Handle | Octagonal Rosewood Handle |
| Region | Fukuyama |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
- Semi-stainless steel won't rust easily but may still patina
Knife details

K-tip Petty
切付ペティ
K-tip utility knife · Double bevel
Small double-bevel utility knife with an angled point and flatter edge for precise work.
Read more-
Hardness
Very good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Maker's hardening hardness: 61 HRC or more
-
Edge retention
Good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from A2 (339 mm of test card cut at 61.5 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 61.5 HRC, as listed by us.
-
Toughness
Good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Fair
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Good
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Good
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
Chromax
クロマックス鋼
Semi-stainless · Takefu Special Steel
Takefu semi-stainless, conventionally melted, 1% carbon, 5% chromium, hardening hardness 61 HRC or more. Easy to sharpen and tough.
Read moreSanmai - Stainless Clad
三枚
3 layers · stainless clad
Hard core between two stainless layers, bare only at the edge; the cladding resists rust.
Read more
Migaki
Polished satin
Smooth polished surface, satin to soft sheen rather than mirror. Scratches show.
Read more
Octagonal Rosewood Handle
Octagonal WA
Rosewood, eight-sided, with a black synthetic horn ferrule. Reddish-brown, fine grain.








