It is very sharp and has excellent cutting power.


Hatsukokoro x Yoshikane SKD Nashiji K-tip Gyuto 210mm Ebony Handle is backordered and will ship as soon as it is back in stock.
Pickup in Australia only
Delivery unavailable for this item. Available for in-store pickup only.
| Line | Hatsukokoro By Yoshikane SKD Nashiji |
| Profile | K-tip Gyuto / K-tip chef's knife |
| Bevel Type | Double Bevel |
| Weight | 200 g | 7.1 oz |
| Edge Length | 210 mm | 8 17/64″ |
| Heel Height | 50 mm | 1 31/32″ |
| Width @ Heel | 3.2 mm | 1/8″ |
| Width @ Mid | 2.7 mm | 7/64″ |
| Width @ 1cm from Tip | 1.2 mm | 3/64″ |
| Steel | SKD | Semi-stainless |
| Blade Construction | Sanmai - Stainless Clad |
| Typical hardness | 62 to 64 HRC |
| Surface Finish | Nashiji |
| Handle | Octagonal Ebony |
| Region | Sanjo |
| Best for |
|
| Pros | Cons |
|
|
It is very sharp and has excellent cutting power.


Excellent fit and finish · Razor sharp out of the box · Great balance in hand Perfect weight in hand. Razor sharp and excellent cutting performance. Nothing compares but it is on the pricey side

切付牛刀
K-tip chef's knife · Double bevel
Double-bevel chef's knife with an angled tip and flatter edge for push cuts and scoring.
Read moreHow hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 62 to 64 HRC
How long the edge stays sharp in kitchen use before it needs sharpening. Lab figure: 499 mm of test card cut at 60.5 HRC (D2, Knife Steel Nerds CATRA test, 2020). Hardness used: 63 HRC, the usual hardness makers sell it at.
How well the steel resists chipping and cracking from bones, hard boards or twisting.
How slowly the steel rusts or stains when left wet.
How quickly the steel comes back to sharp on a whetstone.
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
SKD合金工具鋼
Semi-stainless
We list Hatsukokoro x Yoshikane SKD knives, each with a nashiji finish and an ebony handle.
Read more三枚
3 layers · stainless clad
Hard core between two stainless layers, bare only at the edge; the cladding resists rust.
Read more
Pear-skin texture
A fine matte texture like the skin of a nashi pear. It may help food release.
Read more
Octagonal WA
Dense, dark ebony in the eight-sided wa shape. The flats give a sure grip for either hand.