Hatsukokoro x Myojin Shirasagi White 2 Left Handed Mioroshi Deba 210mm
Hatsukokoro x Myojin Shirasagi White 2 Left Handed Mioroshi Deba 210mm is backordered and will ship as soon as it is back in stock.
Pickup in Australia only
In Stock Now
-
Hatsukokoro x Myojin Shirasagi White 2 Kamagata Usuba 180mmSale price $168.00 Regular price $198.00Unit price
-
Hatsukokoro x Myojin Shirasagi White 2 Left Handed Mioroshi Deba 270mmSale price $315.00 Regular price $371.00Unit price
-
Exotic: Genkai Masakuni (玄海正國) White 2 Honyaki Usuba 240mm Ebony Set, Full Mirror Finish with Wavy HamonSale price $2,362.00 Regular price $2,779.00Unit price
-
Sukenari White 2 K-tip Yanagiba 300mm, Ebony Brass HandleSale price $294.00 Regular price $346.00Unit price
-
Masakage Yuki White2 Gyuto 210mm Stainless CladSale price $242.00 Regular price $285.00Unit price
-
Sukenari Blue 2 Deba 210mm, Ebony Spacer HandleSale price $336.00 Regular price $396.00Unit price
-
Tsunehisa Ginsan Deba 150mmSale price $158.00 Regular price $186.00Unit price
-
Masamoto Sohonten Hongasumi White 2 Deba 195 mm KS2019Sale price $457.00 Regular price $538.00Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Hatsukokoro Shirasagi White 2 Single Bevel |
| Profile | Deba / Japanese fish knife |
| Bevel Type | Single Bevel |
| Weight | 263 g | 9.3 oz |
| Edge Length | 212 mm | 8 11/32″ |
| Heel Height | 46 mm | 1 13/16″ |
| Width @ Heel | 3.9 mm | 5/32″ |
| Width @ Mid | 3.1 mm | 1/8″ |
| Width @ 1cm from Tip | 1.8 mm | 5/64″ |
| Steel | White 2 / Shirogami #2 | Carbon |
| Blade Construction | Nimai - Soft Iron Clad |
| Typical hardness | 60 to 64 HRC |
| Surface Finish | Kasumi |
| Handle | Octagonal Ebony |
| Region | Tosa |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
- Oil the (carbon) knife if storing for an extended period of time to prevent rust.
Knife details

Deba
出刃
Japanese fish knife · Single or double bevel
A thick, heavy fish knife; dictionaries say it fillets and cuts fish and fowl bones.
Read more-
Hardness
Good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 60 to 64 HRC
-
Edge retention
Good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from 1095 (316 mm of test card cut at 61.8 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 61.5 HRC, the usual hardness makers sell it at. Carbon steels score lower on this abrasive test, which is why our grade also counts hardness.
-
Toughness
Fair
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Low
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Very high
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
White 2 / Shirogami #2
白二鋼
Carbon · Hitachi Metals (now Proterial)
Proterial carbon steel, 1.05 to 1.15% carbon, no chromium or tungsten; not stainless.
Read moreNimai - Soft Iron Clad
二枚・軟鉄
2 layers · single bevel
Two layers, single bevel: hard steel on the back, soft iron elsewhere; it patinas.
Read more
Kasumi
Misty polish
Hazy, matte bevel where soft iron meets hard core steel. The iron patinas and rusts.
Read more
Octagonal Ebony
Octagonal WA
Dense, dark ebony in the eight-sided wa shape. The flats give a sure grip for either hand.







