Sakai Takayuki VG10 Kengata (K-tip) Gyuto 190mm 33 Layer Hammered Damascus

Not quite - and it is the single most common point of confusion when people shop for a kiritsuke. The two knives share the same striking angled, reverse-tanto tip, but underneath that tip they are very different tools.

A K-tip gyuto is normally a double-bevel knife: it is ground on both sides like any Western-style chef's knife, so it is forgiving to use, and sharpened exactly the way you would sharpen a normal gyuto. You get the dramatic kiritsuke look with the everyday usability of an all-purpose chef's knife.

A traditional kiritsuke, including the kiritsuke-yanagiba (slicer), is a single-bevel knife, ground on one side only. It is historically a master chef's knife: it takes real practice to use well, is set up for right-handed users by default, and needs single-bevel sharpening technique to maintain.

So if you want the kiritsuke silhouette with no learning curve, choose a K-tip gyuto. If you specifically want the traditional single-bevel discipline - and the precision it allows on fish and vegetables - choose a true kiritsuke. At Knives and Stones we stock both, and each product page tells you which construction you are looking at.

Yes, it can, though it rusts less readily. VG10 (V金10号) is a stainless steel, and stainless strictly means a steel that rusts less, not one that never rusts.

Takefu, which makes VG10, lists 15% chromium, above the 10.5% that defines stainless steel, and describes its corrosion resistance as excellent. Dry the knife after washing.

Takefu, the steelmaker behind VG10, gives HRC 60 or more as a standard value. The hardness of a finished knife depends on its maker.

Takefu says the steel's 15% chromium, 1% molybdenum and 1.55% cobalt give it high hardness and a long-lasting edge, and that it is easy to sharpen.

Sakai Takayuki (堺孝行) is a brand of Aoki Hamono Seisakusho (青木刃物製作所) in Sakai, Osaka, and the company's own page says so directly. The trademarks for 堺孝行 and 堺菊孝 were registered in 1964.

The company started in Tondabayashi, Osaka, in 1947 as a wholesaler of Sakai forged knives, moved its office to Sakai in 1963, and built its Sanpo factory in Sakai in 1977. So when you see the Sakai Takayuki name, that is Aoki Hamono's own line.

Sakai Takayuki knives are made by Aoki Hamono Seisakusho and its craftsmen in Sakai, Osaka. The company's own traditional-craftsman page profiles its named Sakai smiths.

Sakai works by division of labour: forging, grinding and sharpening are each done by a different specialist. Aoki Hamono's Sanpo factory, home to its smiths and sharpeners since 1978, added an automatic grinding machine for Japanese knives in 2015.

A honyaki is water quenched with sword-style hardening, so it usually runs about 1 to 2 HRC harder than a comparable knife that is not honyaki, though that varies by maker. The quench has a high failure rate, and that craft is a large part of the price.

A honyaki also needs more care. If your kitchen is busy, an everyday line such as the 33-layer or 45-layer VG10 Damascus, which share a VG10 core and differ mostly in looks, is the easier choice; if you want a harder edge and the craft itself, a honyaki can suit you.