Kisuke x Xinguo ATS34 K tip Gyuto Tsuchime Mirror Kasumi 210mm w Knife Guard
Kisuke x Xinguo ATS34 K tip Gyuto Tsuchime Mirror Kasumi 210mm w Knife Guard is backordered and will ship as soon as it is back in stock.
Pickup in Australia only
In Stock Now
-
Hatsukokoro Ginga ATS34 Damascus Bunka 180mmSale price $256.00 Regular price $301.00Unit price
-
Hatsukokoro Hayabusa ATS34 Sanmai Petty 150mmSale price $126.00 Regular price $148.00Unit price
-
Hatsukokoro Ginga ATS34 Damascus Gyuto 210mmSale price $277.00 Regular price $326.00Unit price
-
K&S Yuepo SLD Nashiji K-tip Gyuto 210mm, Ebony HandleSale price $104.00 Regular price $122.00Unit price
-
Hatsukokoro Ginrei Ginsan K-tip Gyuto 210mm Nashiji EbonySale price $115.00 Regular price $136.00Unit price
-
Hatsukokoro Ryuhyo SG2 Black Damascus K-tip Gyuto 210mm EbonySale price $212.00 Regular price $249.00Unit price
-
Hatsukokoro Kaijin Blue 2 K-tip Gyuto 210mm Migaki Curly MapleSale price $104.00 Regular price $122.00Unit price
-
Nigara SG2 Tsuchime Matt Migaki K-tip Gyuto 210mm EbonySale price $220.00 Regular price $258.00Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
Goes well with
Detailed Specifications
| Line | Manaka ATS34 x Xinguo |
| Profile | K-tip Gyuto / K-tip chef's knife |
| Bevel Type | Double Bevel |
| Weight | 192 g | 6.8 oz |
| Edge Length | 211 mm | 8 5/16″ |
| Heel Height | 48 mm | 1 57/64″ |
| Width @ Heel | 2.6 mm | 7/64″ |
| Width @ Mid | 2.4 mm | 3/32″ |
| Width @ 1cm from Tip | 1.1 mm | 3/64″ |
| Steel | ATS34 | Stainless |
| Blade Construction | Warikomi - Stainless Clad |
| Typical hardness | 60 to 61 HRC |
| Surface Finish | Tsuchime |
| Handle | Special Handle |
| Region | Sanjo |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

K-tip Gyuto
切付牛刀
K-tip chef's knife · Double bevel
Double-bevel chef's knife with an angled tip and flatter edge for push cuts and scoring.
Read more-
Hardness
Good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 60 to 61 HRC
-
Edge retention
Very good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from CPM-154 (492 mm of test card cut at 61 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 60.5 HRC, as listed by us.
-
Toughness
Good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Good
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Good
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Fair
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
ATS34
ATS-34
Stainless · Hitachi Metals (now Proterial)
Proterial stainless, 14% chromium, 4% molybdenum, hardening hardness over 59 HRC. Stainless rusts less; dry it after washing.
Read moreWarikomi - Stainless Clad
割込・ステンレス
Core set into stainless
Hard steel set into a split in stainless cladding, from the edge. Only the edge can rust.
Read more
Tsuchime
槌目
Hammered surface
Hammer marks across the upper blade. The dimples may help food release.
Read moreSpecial Handle
Octagonal WA
The maker's own handle; material not disclosed. See the product photos for its look.










