Nigara VG10 Damascus Tsuchime Gyuto 240mm Black Chacate
Nigara VG10 Damascus Tsuchime Gyuto 240mm Black Chacate is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
In Stock Now
-
Nigara VG10 Damascus Tsuchime Nakiri 165mmSale price $195.98 Regular price $229.95Unit price
-
Nigara VG10 Damascus Tsuchime Bunka 175mmSale price $195.98 Regular price $229.95Unit price
-
Nigara VG10 Damascus Tsuchime Santoku 175mmSale price $203.98 Regular price $239.95Unit price
-
Nigara Anmon (暗紋) SG2 Raindrop Damascus K-tip Sujihiki 240mm Mother-of-pearl WesternSale price $764.98 Regular price $899.95Unit price
-
Nigara SG2 Tsuchime K-tip Nakiri 165mm Kurouchi Turquoise HandleSale price $535.98 Regular price $629.95Unit price
-
Nigara SG2 Kurouchi Tsuchime Sujihiki 300mm Western Ironwood w SayaSale price $713.95 Regular price $839.95Unit price
-
Nigara SG2 Kurouchi Tsuchime Gyuto 210mm Western IronwoodSale price $543.98 Regular price $639.95Unit price
-
Nigara SG2 Kurouchi Tsuchime K-tip Gyuto 210mm Western IronwoodSale price $509.98 Regular price $599.95Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Goes well with
Detailed Specifications
| Line | Nigara VG10 Tsuchime Damascus |
| Profile | Gyuto / Chef's knife |
| Bevel Type | Double Bevel |
| Weight | 203 g | 7.2 oz |
| Edge Length | 233 mm | 9 11/64″ |
| Heel Height | 54 mm | 2 1/8″ |
| Width @ Heel | 2.2 mm | 3/32″ |
| Width @ Mid | 2.1 mm | 5/64″ |
| Width @ 1cm from Tip | 1.1 mm | 3/64″ |
| Steel | VG10 | Stainless |
| Blade Construction | Sanmai - Stainless Damascus Clad |
| Maker's hardening hardness | 60 HRC or more |
| Surface Finish | Tsuchime |
| Handle | Octagonal Black Chacate |
| Region | Aomori |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

Gyuto
牛刀
Chef's knife · Double bevel
Double-bevel all-purpose chef's knife with a pointed tip; thinner than a Western one.
Read more-
Hardness
Fair
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Maker's hardening hardness: 60 HRC or more
-
Edge retention
Good
How long the edge stays sharp in kitchen use before it needs sharpening. Lab figure: 479 mm of test card cut at 61.6 HRC (VG-10, Knife Steel Nerds CATRA test, 2020). Hardness used: 60.5 HRC, the usual hardness makers sell it at.
-
Toughness
Fair
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
High
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Good
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Good
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
VG10
V金10
Stainless · Takefu Special Steel
Takefu stainless, 1% carbon, 15% chromium, 1.55% cobalt. Easy to sharpen.
Read moreSanmai - Stainless Damascus Clad
三枚ダマスカス
3 layers · damascus clad
Hard core between stainless damascus layers, bare at the edge. Thinning wears the pattern.
Read more
Tsuchime
槌目
Hammered surface
Hammer marks across the upper blade. The dimples may help food release.
Read more
Octagonal Black Chacate
Octagonal WA
Black chacate, a dense dark African wood near ebony, eight-sided; may show pale sapwood.









