Takeshi Saji SG2 Diamond Damascus Gyuto 270mm Ironwood
Takeshi Saji SG2 Diamond Damascus Gyuto 270mm Ironwood is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Detailed Specifications
| Line | Saji SG2 Diamond Damascus |
| Profile | Gyuto / Chef's knife |
| Bevel Type | Double Bevel |
| Weight | 327 g | 11.5 oz |
| Edge Length | 272 mm | 10 45/64″ |
| Heel Height | 54 mm | 2 1/8″ |
| Width @ Heel | 2.6 mm | 7/64″ |
| Width @ Mid | 2.4 mm | 3/32″ |
| Width @ 1cm from Tip | 1.2 mm | 3/64″ |
| Steel | SG2 / R2 | Powdered | Stainless |
| Blade Construction | Sanmai - Stainless Clad |
| Typical working hardness | 61 to 65 HRC |
| Surface Finish | Etched |
| Handle | Saji Western |
| Region | Takefu |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

Gyuto
牛刀
Chef's knife · Double bevel
Double-bevel all-purpose chef's knife with a pointed tip; thinner than a Western one.
Read more-
Hardness
Good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical working hardness: 61 to 65 HRC
-
Edge retention
Good
How long the edge stays sharp before it needs sharpening. Our number comes from a lab test that counts how much card a blade cuts before it dulls.
-
Toughness
Fair
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
High
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Fair
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
High
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
SG2 / R2
スーパーゴールド2
Stainless · Takefu Special Steel
Takefu powder stainless, 61 to 65 HRC. Long edge; resists rust.
Read moreSanmai - Stainless Clad
三枚
3 layers · stainless clad
Hard core between two stainless layers, bare only at the edge; the cladding resists rust.
Read more
Etched
Acid-etched pattern
Acid darkens the layers at different rates to show the damascus. Heavy thinning fades it.
Read more
Saji Western
Western with bolster
Western grip by Takeshi Saji in stag, desert ironwood or synthetic turquoise. Each varies.
Frequently asked questions
Gyuto or santoku: which should I choose?
What is a gyuto knife used for?
What gyuto length should I choose?
240mm vs 210mm gyuto: which size should I choose?
Japanese or German kitchen knives: which should I buy?
What is the flat spot on a knife, and is it the same as the "sweet spot"?
Gyuto or chef's knife: what is the difference?
SG2 steel knives at Knives and Stones
You May Also Like
-
Takeshi Saji VG10 Rainbow Damascus Sujihiki 240mmSale price $679.98 Regular price $799.95Unit price
-
Nigara SG2 Matt Migaki Tsuchime Butcher Knife 165mmSale price $322.98 Regular price $379.95Unit price
-
Shiro Kamo Suminagashi SG2 Damascus Gyuto 240mm, Stabilized Curly Maple HandleSale price $424.98 Regular price $499.95Unit price
-
K&S Arare SG2 Nakiri 165mm by Iron Clad, Black Charcate HandleSale price $237.98 Regular price $279.95Unit price
-
Sukenari SG2 Honyaki Yanagiba 300mm, Ebony Handle Brass FerruleSale price $2,039.98 Regular price $2,399.95Unit price
-
Sukenari SG2 Honyaki Yanagiba 270mm, Ebony Handle Horn FerruleSale price $1,869.98 Regular price $2,199.95Unit price
-
Sukenari SG2 Nimai Sakimaru Takobiki 330mm, Ebony Handle Horn FerruleSale price $1,104.98 Regular price $1,299.95Unit price
-
Yoshimi Kato Hyo SG2 Gyuto 210mm, Carbon Fibre HandleSale price $450.98 Regular price $529.95Unit price









