Sakai Takayuki Gintan Ginsanko Yanagiba 270mm, Ebony Handle Blonde Horn

A yanagiba (柳刃包丁) is a sashimi knife for slicing raw fish. A knife maker's guide says a sashimi knife cuts without breaking the fibres of the flesh, and that it is longer and narrower than other knives because slicing sashimi with crisp edges needs the length.

The whole length goes through one pulling cut. The Sakai cutlery association calls the yanagiba the sashimi knife used mainly in the Kansai region.

Size a yanagiba to the fish you prepare: a knife maker's guide gives 270 to 360 mm for professional use and 240 to 270 mm for home use, with 270 mm at home if you slice larger fish.

The guide says the whole length goes through one pulling cut, so do not choose too short a knife, and at home it points to the size of your board and your work space. We list the yanagiba (柳刃) from 210 to 360 mm, some made for left-handed use.

No. The Sakai cutlery association describes the yanagiba (柳刃包丁) edge as so acute that it cannot be used on hard things such as bones.

For bones the association describes the deba (出刃包丁), whose heel is used to hit them.

Ginsan steel, also known as Silver #3 or G3, is a stainless steel made by Proterial in Japan, containing 0.95 to 1.10% carbon and 13.00 to 14.50% chromium, and it is used in Japanese knives because it combines the sharpness and ease of sharpening of carbon steel with the rust resistance of stainless steel. It is a fine-grained steel that takes a very sharp edge, and rated by Proterial at over 59 HRC, it offers a practical balance of edge retention and sharpenability for everyday kitchen use.

The name "Ginsan" (銀三) literally means "silver three," referring to its Silver #3 designation. Its moderate chromium content makes it far less reactive than carbon steels, so it won't discolor or rust as quickly, while its carbon content keeps the edge keen and responsive on the stones. For home cooks and professionals who want a stainless knife that still feels like a traditional Japanese blade, Ginsan is a common middle ground.

Yes. Proterial lists the steel as GIN 3 (銀紙3号) with 13.00 to 14.50% chromium, above the Japan Stainless Steel Association's 10.5% minimum for stainless steel.

Proterial describes it as a stainless steel with hardness and sharpness comparable to carbon steel, used in various kitchen knives and scissors, and the association notes that stainless, strictly, means it rusts less. Wash the knife and dry it after use.

Sakai Takayuki (堺孝行) is a brand of Aoki Hamono Seisakusho (青木刃物製作所) in Sakai, Osaka, and the company's own page says so directly. The trademarks for 堺孝行 and 堺菊孝 were registered in 1964.

The company started in Tondabayashi, Osaka, in 1947 as a wholesaler of Sakai forged knives, moved its office to Sakai in 1963, and built its Sanpo factory in Sakai in 1977. So when you see the Sakai Takayuki name, that is Aoki Hamono's own line.

Sakai Takayuki knives are made by Aoki Hamono Seisakusho and its craftsmen in Sakai, Osaka. The company's own traditional-craftsman page profiles its named Sakai smiths.

Sakai works by division of labour: forging, grinding and sharpening are each done by a different specialist. Aoki Hamono's Sanpo factory, home to its smiths and sharpeners since 1978, added an automatic grinding machine for Japanese knives in 2015.

A honyaki is water quenched with sword-style hardening, so it usually runs about 1 to 2 HRC harder than a comparable knife that is not honyaki, though that varies by maker. The quench has a high failure rate, and that craft is a large part of the price.

A honyaki also needs more care. If your kitchen is busy, an everyday line such as the 33-layer or 45-layer VG10 Damascus, which share a VG10 core and differ mostly in looks, is the easier choice; if you want a harder edge and the craft itself, a honyaki can suit you.