Hatsukokoro Sentan White 2 SS Clad Chinese Cleaver 200mm
Hatsukokoro Sentan White 2 SS Clad Chinese Cleaver 200mm is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
In Stock Now
-
Hatsukokoro Hayabusa ATS34 Sanmai Petty 150mmSale price $203.98 Regular price $239.95Unit price
-
Hatsukokoro Blue 2 Damascus Migaki Santoku 180mm Ebony HandleSale price $254.98 Regular price $299.95Unit price
-
Hatsukokoro Sumi Blue 2 Kurouchi Santoku 165mm Black Chacate HandleSale price $135.98 Regular price $159.95Unit price
-
Hatsukokoro Shikkoku Blue 2 Kurouchi Santoku 165mm Ebony HandleSale price $151.98 Regular price $178.00Unit price
-
Hatsukokoro x Myojin Shirasagi White 2 Left Handed Deba 150mmSale price $339.98 Regular price $399.95Unit price
-
Exotic: Genkai Masakuni (玄海正國) White 2 Honyaki Usuba 240mm Ebony Set, Full Mirror Finish with Wavy HamonSale price $3,824.98 Regular price $4,499.95Unit price
-
Hatsukokoro x Myojin Shirasagi White 2 Kamagata Usuba 180mmSale price $271.98 Regular price $319.95Unit price
-
Sukenari White 2 K-tip Yanagiba 300mm, Ebony Brass HandleSale price $475.98 Regular price $559.95Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Detailed Specifications
| Line | Hatsukokoro Sentan White 2 Chinese Cleaver |
| Profile | Chuka (Cleaver) / Chinese cleaver |
| Steel | White 2 / Shirogami #2 | Carbon |
| Typical hardness | 60 to 64 HRC |
| Surface Finish | Nashiji |
| Handle | |
| Region | Hyogo |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
- Oil the (carbon) knife if storing for an extended period of time to prevent rust.
Knife details

Chuka (Cleaver)
中華
Chinese cleaver · Double bevel
Large, wide-bladed Chinese-style knife; KAI says the thicker blades take bone-in chicken and meat.
Read more-
Hardness
Very good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 60 to 64 HRC
-
Edge retention
Good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from 1095 (316 mm of test card cut at 61.8 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 61.5 HRC, the usual hardness makers sell it at. Carbon steels score lower on this abrasive test, which is why our grade also counts hardness.
-
Toughness
Good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
Low
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
High
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Very high
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
White 2 / Shirogami #2
白二鋼
Carbon · Hitachi Metals (now Proterial)
Proterial carbon steel, 1.05 to 1.15% carbon, no chromium or tungsten; not stainless.
Read more
Nashiji
Pear-skin texture
A fine matte texture like the skin of a nashi pear. It may help food release.
Read more






