Sakai Takayuki S/S AUS8 Sujihiki / Slicer 270mm

Between 210 and 270 mm, depending on where it will work. One Japanese maker lists 210 to 240 mm, double-bevel, for home use and 240 to 270 mm, single- or double-bevel, for professional kitchens.

Another, in Sakai, recommends 240 mm at home, with the size of your board in mind, and 270 mm for professional use.

A sujihiki is a long, double-bevel knife for dividing larger pieces of meat into their parts, and its length lets it slice sashimi too; a yanagiba is the sashimi knife.

The Sakai cutlery association describes the yanagiba (柳刃包丁) edge as so acute that it cannot be used on bone or other hard things, so choose the sujihiki for meat and the yanagiba if sashimi is the main job.

AUS-8 is made by Aichi Steel, whose page on stainless steels for blades groups the AUS grades with its 13-chromium steels. There, AUS-6M, AUS-8 and AUS-10 are the grades that add still more carbon and add vanadium and molybdenum, which Aichi says further improves hardness, wear resistance and tempering resistance.

By the JSSA's definition, stainless means 10.5% or more chromium, and the JSSA notes that stainless, strictly, means it rusts less, so wash the knife after use and dry it.

Sakai Takayuki (堺孝行) is a brand of Aoki Hamono Seisakusho (青木刃物製作所) in Sakai, Osaka, and the company's own page says so directly. The trademarks for 堺孝行 and 堺菊孝 were registered in 1964.

The company started in Tondabayashi, Osaka, in 1947 as a wholesaler of Sakai forged knives, moved its office to Sakai in 1963, and built its Sanpo factory in Sakai in 1977. So when you see the Sakai Takayuki name, that is Aoki Hamono's own line.

Sakai Takayuki knives are made by Aoki Hamono Seisakusho and its craftsmen in Sakai, Osaka. The company's own traditional-craftsman page profiles its named Sakai smiths.

Sakai works by division of labour: forging, grinding and sharpening are each done by a different specialist. Aoki Hamono's Sanpo factory, home to its smiths and sharpeners since 1978, added an automatic grinding machine for Japanese knives in 2015.

A honyaki is water quenched with sword-style hardening, so it usually runs about 1 to 2 HRC harder than a comparable knife that is not honyaki, though that varies by maker. The quench has a high failure rate, and that craft is a large part of the price.

A honyaki also needs more care. If your kitchen is busy, an everyday line such as the 33-layer or 45-layer VG10 Damascus, which share a VG10 core and differ mostly in looks, is the easier choice; if you want a harder edge and the craft itself, a honyaki can suit you.