Tojiro VG10 Zen Series Santoku 165mm FD-567
Tojiro VG10 Zen Series Santoku 165mm FD-567 is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
In Stock Now
-
Tojiro DP3 Yo-Deba 240mm F-815Sale price $246.98 Regular price $289.95Unit price
-
Tojiro SG2 Powdered Steel Gyuto 240 mm F-521Sale price $288.98 Regular price $339.00Unit price
-
Tojiro SG2 Powdered Steel Santoku 170 mm F-517Sale price $230.00 Regular price $289.95Unit price
-
Tojiro VG10 Supreme 37 Layered Flowing Mist Gyuto 260mm FD-915Sale price $167.99 Regular price $239.95Unit price
-
Tojiro VG10 Supreme 63 Layered Nickel Damascus Gyuto 260mm FD-905Sale price $188.98 Regular price $269.95Unit price
-
Sakai Takayuki VG10 Bunka 160mm 33-Layer Hammered DamascusSale price $212.98 Regular price $249.95Unit price
-
Sakai Takayuki VG10 33 Layer Damascus Santoku 170mm Teak HandleSale price $220.98 Regular price $259.95Unit price
-
Sakai Takayuki VG10 Butcher Knife 210mm (8.9") 33 Layer Hammered DamascusSale price $246.98 Regular price $289.95Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Goes well with
Detailed Specifications
| Line | Tojiro VG10 Zen Series |
| Profile | Santoku / Santoku |
| Steel | VG10 | Stainless |
| Blade Construction | Sanmai - Stainless Clad |
| Maker's hardening hardness | 60 HRC or more |
| Surface Finish | Tsuchime |
| Handle | |
| Region | Tsubame |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

Santoku
三徳
Santoku · Double bevel
An all-purpose knife for meat, fish and vegetables, with a wide blade and a rounded tip.
Read more-
Hardness
Good
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Maker's hardening hardness: 60 HRC or more
-
Edge retention
Good
How long the edge stays sharp in kitchen use before it needs sharpening. Lab figure: 479 mm of test card cut at 61.6 HRC (VG-10, Knife Steel Nerds CATRA test, 2020). Hardness used: 60.5 HRC, the usual hardness makers sell it at.
-
Toughness
Good
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
High
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Good
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Good
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
VG10
V金10
Stainless · Takefu Special Steel
Takefu stainless, 1% carbon, 15% chromium, 1.55% cobalt. Easy to sharpen.
Read moreSanmai - Stainless Clad
三枚
3 layers · stainless clad
Hard core between two stainless layers, bare only at the edge; the cladding resists rust.
Read more
Tsuchime
槌目
Hammered surface
Hammer marks across the upper blade. The dimples may help food release.
Read more
