Sakai Takayuki Ginga ZA-18 Damascus Gyuto 210/240mm
Sakai Takayuki Ginga ZA-18 Damascus Gyuto 210/240mm - 240 mm is backordered and will ship as soon as it is back in stock.
Sold out right now
Leave your email and we’ll send one message the moment it’s back in stock.
One email, no marketing. Privacy policy.
We match the item price, not shipping, of in-stock products from reputable specialist knife retailers. Clearance and pre-owned items excluded. Each request is checked by our team.
In Stock Now
-
Sakai Takayuki Tokujou(別誂) White 2 Honesuki (Boning Knife) 150/180mmSale priceFrom $331.98 Regular price $389.95Unit price
-
Sakai Takayuki Tokujou Yanagiba 330mm White 2 Carbon SteelSale price $450.98 Regular price $529.95Unit price
-
Sakai Takayuki VG10 Gyuto 210mm (8.9") 33 Layer Hammered DamascusSale price $237.98 Regular price $279.95Unit price
-
Sakai Takayuki VG10 33 Layer Damascus Gyuto 210mm Blue HandleSale price $237.98 Regular price $279.95Unit price
-
Sakai Takayuki VG10 Petty - Utility 150mm (5.9") 33 Layer Hammered DamascusSale price $152.98 Regular price $179.95Unit price
-
Sakai Takayuki VG10 Santoku 180mm (7.1") 33 Layer Hammered DamascusSale price $212.98 Regular price $249.95Unit price
-
Sakai Takayuki VG10 Gyuto 240mm (9.4") 33 Layer Hammered DamascusSale price $280.98 Regular price $329.95Unit price
-
Sakai Takayuki VG10 Sujihiki 240mm (9.4") 33 Layer Hammered DamascusSale price $254.98 Regular price $299.95Unit price
Availability
Delivery unavailable for this item. Available for in-store pickup only.
-
St Peters, NSW —2 Bishop St, Unit 2, St Peters NSW 2044
-
Crows Nest, NSW —107 West St, Shop 1, Crows Nest NSW 2065Pickup only
-
Prahran, VIC —180 Commercial Road, Shop 1, Prahran VIC 3181Pickup only
Detailed Specifications
| Line | Sakai Takayuki Ginga ZA-18 Damascus |
| Profile | Gyuto / Chef's knife |
| Steel | ZA-18 | Stainless |
| Blade Construction | Sanmai - Stainless Damascus Clad |
| Typical hardness | 60 to 62 HRC |
| Surface Finish | Mirror Polish |
| Handle | |
| Region | Sakai |
| Best for |
|
| Pros | Cons |
|
|
- Don't cut hard things! Japanese knives are brittle so bone hacking is a NO NO!
- Wash with neutral detergent after use, and wipe dry;
- Please don't wash knife with dishwasher, it will damage the wood handle;
- Be careful not to leave the knife close to a heat source for a long time;
- It is a lot more dangerous to cut with a blunt knife than a sharp knife!
- It is best to sharpen a Japanese knife regularly on a waterstone.
Knife details

Gyuto
牛刀
Chef's knife · Double bevel
Double-bevel all-purpose chef's knife with a pointed tip; thinner than a Western one.
Read more-
Hardness
Fair
How hard the steel is after heat treatment, measured in HRC. Harder steel can take a thinner, sharper edge but is more likely to chip. Typical hardness: 60 to 62 HRC
-
Edge retention
Very good
How long the edge stays sharp in kitchen use before it needs sharpening. Not lab-tested; estimated from CPM-154 (492 mm of test card cut at 61 HRC, Knife Steel Nerds CATRA test, 2020). Hardness used: 61 HRC, as listed by us.
-
Toughness
Low
How well the steel resists chipping and cracking from bones, hard boards or twisting.
-
Rust resistance
High
How slowly the steel rusts or stains when left wet.
-
Ease of sharpening
Good
How quickly the steel comes back to sharp on a whetstone.
-
Sharpness
Good
How fine an edge the steel can take and hold. Judged from the hard carbides inside it: smaller and fewer carbides allow a keener edge.
Our ratings, inferred from published lab tests and composition.
Our edge-retention grade is a kitchen rating. It weighs the hardness each steel is sold at, which keeps a thin edge from rolling, twice as heavily as lab wear tests, and the final grade is our judgment from selling and sharpening these knives for over a decade. Lab card-cutting tests measure abrasive wear only, so they can rank carbon steels lower. Tap ? for the lab figure.
ZA-18
ZA-18ステンレス鋼
Stainless
We list ZA-18 in Sakai Takayuki's Ginga Damascus line and a Tsunehisa Damascus sujihiki.
Read moreSanmai - Stainless Damascus Clad
三枚ダマスカス
3 layers · damascus clad
Hard core between stainless damascus layers, bare at the edge. Thinning wears the pattern.
Read more
Mirror Polish
Mirror polish
Polished to a true mirror that shows hamon or damascus clearly. Every scratch shows.
Read more
