Sakai Takayuki INOX Stainless Yanagiba 270mm

A yanagiba (柳刃包丁) is a sashimi knife for slicing raw fish. A knife maker's guide says a sashimi knife cuts without breaking the fibres of the flesh, and that it is longer and narrower than other knives because slicing sashimi with crisp edges needs the length.

The whole length goes through one pulling cut. The Sakai cutlery association calls the yanagiba the sashimi knife used mainly in the Kansai region.

Size a yanagiba to the fish you prepare: a knife maker's guide gives 270 to 360 mm for professional use and 240 to 270 mm for home use, with 270 mm at home if you slice larger fish.

The guide says the whole length goes through one pulling cut, so do not choose too short a knife, and at home it points to the size of your board and your work space. We list the yanagiba (柳刃) from 210 to 360 mm, some made for left-handed use.

No. The Sakai cutlery association describes the yanagiba (柳刃包丁) edge as so acute that it cannot be used on hard things such as bones.

For bones the association describes the deba (出刃包丁), whose heel is used to hit them.

Inox is French, short for inoxydable (acier inoxydable), the French words for stainless steel.

So the word on a blade says stainless steel, not which grade or brand. Stainless steel strictly means a steel that rusts less, so dry the knife after washing.

Sakai Takayuki (堺孝行) is a brand of Aoki Hamono Seisakusho (青木刃物製作所) in Sakai, Osaka, and the company's own page says so directly. The trademarks for 堺孝行 and 堺菊孝 were registered in 1964.

The company started in Tondabayashi, Osaka, in 1947 as a wholesaler of Sakai forged knives, moved its office to Sakai in 1963, and built its Sanpo factory in Sakai in 1977. So when you see the Sakai Takayuki name, that is Aoki Hamono's own line.

Sakai Takayuki knives are made by Aoki Hamono Seisakusho and its craftsmen in Sakai, Osaka. The company's own traditional-craftsman page profiles its named Sakai smiths.

Sakai works by division of labour: forging, grinding and sharpening are each done by a different specialist. Aoki Hamono's Sanpo factory, home to its smiths and sharpeners since 1978, added an automatic grinding machine for Japanese knives in 2015.

A honyaki is water quenched with sword-style hardening, so it usually runs about 1 to 2 HRC harder than a comparable knife that is not honyaki, though that varies by maker. The quench has a high failure rate, and that craft is a large part of the price.

A honyaki also needs more care. If your kitchen is busy, an everyday line such as the 33-layer or 45-layer VG10 Damascus, which share a VG10 core and differ mostly in looks, is the easier choice; if you want a harder edge and the craft itself, a honyaki can suit you.